•
Mellanox CX4 SP 100 Gb NIC (6W1HY)
•
Mellanox DP 40 Gb QSFP NIC (C8Y42)
•
Intel QP 10 Gb Base-T NIC (K5V44)
•
Solarflare Sunspot DP 10Gb NIC (NPHCM)
•
Solarflare Nova DP 10Gb NIC (WY7T5)
•
Qlogic DP 10Gb V1 NIC (VCXN5)
Listed below are the restrictions for fan redundancy:
•
GPGPU configurations are not supported at 35deg. C of ambient or above.
•
Mellanox 100G NICs are not supported.
For information on the restriction for fresh air condition, see the
Specification section.
Cooling fan matrix
Table 29. Cooling fan matrix
Chassis
3.5 inch x 8
3.5 inch x 18
2.5 inch x 16
2.5 inch x 32
2.5 inch x 16 + NVMe
Fan redundancy, FA and
high cooling tier PCIe
card
GPGPU card
Removing a middle or rear cooling fan
The procedure for removing a standard and a high performance fans is identical.
Prerequisites
WARNING:
Opening or removing the system cover when the system is on may expose you to a risk of electric shock. Exercise
utmost care while removing or installing cooling fans.
CAUTION:
The cooling fans are hot swappable. To maintain proper cooling while the system is on, replace only one fan at a time.
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Step
Press the release tab and lift the cooling fan out of the cooling fan assembly.
94
Installing and removing system components
FAN1, FAN2 (Standard
[STD])
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Safety
instructions.
Before working inside your
Expanded operating temperature restrictions
FAN3, FAN4, FAN5,
FAN6 (Standard [STD]/
High performance
[HPR])
-
Yes (STD)
-
-
Yes (STD)
Yes (STD)
Yes (HPR)
system.
topic in the Technical
FAN_EXT_R,
FAN_EXT_L
-
-
-
-
-
-
Yes
Fan configuration
Base configuration
Rich configuration
Base configuration
Base configuration
Rich configuration
Rich configuration
GPU configuration