Table of Contents
Advertisement
Setting up your system
Complete the following steps to set up your system:
1
Unpack the system.
2
Install the system into the rack. For more information about installing the system into the rack, see the Rail Installation Guide at
Dell.com/poweredgemanuals.
3
Connect the peripherals to the system.
4
Connect the system to its electrical outlet.
5
Turn the system on by pressing the power button or by using iDRAC.
6
Turn on the attached peripherals.
For more information about setting up your system, see the Getting Started Guide that shipped with your system.
Related links
iDRAC configuration
Options to set up iDRAC IP address
iDRAC configuration
The Integrated Dell Remote Access Controller (iDRAC) is designed to make system administrators more productive and improve the overall
availability of Dell systems. iDRAC alerts administrators about system issues, helps them perform remote system management, and reduces
the need for physical access to the system.
Options to set up iDRAC IP address
You must configure the initial network settings based on your network infrastructure to enable the communication to and from iDRAC.
NOTE:
For static IP configuration, you must request for it at the time of purchase.
This option is set to DHCP by Default. You can set up the IP address by using one of the following interfaces:
Interfaces
Document/Section
iDRAC Settings
See Dell Integrated Dell Remote Access Controller User's Guide at
utility
Dell Deployment
See Dell Deployment Toolkit User's Guide at
Toolkit
Dell Lifecycle
See Dell Lifecycle Controller User's Guide at
Controller
iDRAC Direct and
See Dell Integrated Dell Remote Access Controller User's Guide at
Quick Sync 2
(optional)
Initial system setup and configuration
Dell.com/poweredgemanuals
Dell.com/openmanagemanuals
Dell.com/poweredgemanuals
Dell.com/poweredgemanuals
Initial system setup and configuration
>
OpenManage Deployment Toolkit
3
37
Advertisement
Table of Contents
