Installing A Drive Blank - Dell EMC PowerEdge T640 D24XR Installation And Service Manual

Figure 27. Removing a drive blank
Next step
1 Install a drive or drive

Installing a drive blank

The procedure for installing 2.5 inch and 3.5 inch drive blanks is identical.
Prerequisites
1 Follow the safety guidelines listed in
2 If installed, remove the front bezel.
CAUTION: Mixing drive blanks from previous generations of PowerEdge servers is not supported.
Step
Insert the drive blank into the drive slot, and push the blank until the release button clicks into place.
blank.
Safety instructions.
Installing and removing system components 71