Installing The Main Power Interposer Board - Dell EMC PowerEdge T640 D24XR Installation And Service Manual

Figure 112. Removing the main PIB
Next step
1 Install the main power interposer

Installing the main power interposer board

Prerequisite
Follow the safety guidelines listed in
Steps
1 Align the screw holes on the main power interposer board (PIB) with the holes on the system chassis.
2 Using the Phillips #2 screwdriver, secure the main PIB to the system using the screws.
3 Connect all the disconnected power cables to the main PIB.
Figure 113. Installing the main power interposer board
Next steps
1 If removed, install the GPU
2 Install the system board.
3 Install the power supply
4 Follow the procedure listed in
160 Installing and removing system components
board.
Safety instructions.
PIB.
units.
After working inside your system.