Table of Contents
Advertisement
Figure 87. 18 x 3.5 SAS/SATA backplane
1
backplane power connector A [J_BP_PWR_A1]
3
backplane power connector B [J_BP_PWR_B1]
5
I2C connector
7
SAS A0_B0 connector [J_SAS_A0_B0]
Figure 88. 8 x 3.5 SAS/SATA backplane
1
optical drive power connector [J_ODD1]
3
SAS A0 connector [J_BP_SIG]
5
SAS B0 connector [J_SAS_B0]
Removing a backplane
Prerequisites
CAUTION:
To prevent damage to the drives and backplane, you must remove the hard drives from the system before removing
the backplane.
138
Installing and removing system components
2
controller
4
optical drive power connector [J_ODD1]
6
backplane signal connector [J_BP_SIG1]
2
backplane power connector [J_BP_PWR_A]
4
backplane signal connector [J_SAS_A0]
Advertisement
Table of Contents
