Table of Contents
Advertisement
6.
Grip tool as lightly as possible (while
still keeping safe control of it). Let
the tool do the work.
7.
To reduce vibration, maintain the tool
as explained in this manual. If any
abnormal vibration occurs, stop use
immediately.
saVe tHese
instructiOns.
grOunding
and deatH FrOM
incOrrect grOunding
wire cOnnectiOn:
Check with a qualified
electrician if you are in doubt
as to whether the outlet is
properly grounded. do not
modify the power cord plug
provided with the tool. never
remove the grounding prong
from the plug. do not use the
tool if the power cord or plug
is damaged. if damaged, have
it repaired by a service facility
before use. if the plug will not
fit the outlet, have a proper
outlet installed by a qualified
electrician.
SKU 98107
For technical questions, please call 1-800-444-3353.
tO preVent
electric sHOcK
double insulated tools: tools
with two prong plugs
1.
Tools marked "Double Insulated" do
not require grounding. They have
a special double insulation system
which satisfies OSHA requirements
and complies with the applicable
standards of Underwriters Labora-
tories, Inc., the Canadian Standard
Association, and the National Electri-
cal Code. (see Outlets for 2-prong
plug.)
2.
Double insulated tools may be used
in either of the 120 volt outlets shown
in the preceding illustration. (see
Outlets for 2-prong plug.)
extension cords
1.
Grounded
tools require a three wire
extension cord. Double Insulated
tools can use either a two or three
wire extension cord.
2.
As the distance from the supply outlet
increases, you must use a heavier
gauge extension cord. Using exten-
sion cords with inadequately sized
wire causes a serious drop in voltage,
resulting in loss of power and pos-
sible tool damage.
(see table a.) The smaller the
gauge number of the wire, the greater
the capacity of the cord. For ex-
Page 10
Advertisement
Table of Contents
