Manufacturer's Note; Certification - tams elektronik LD-G-24 Manual

LD-G-24
§
After programming the decoder the locomotive does not run or runs
badly.
Possible cause: The set values for the CV are inconsistent.
à Perform a decoder reset and program the decoder anew.
§
In digital mode the locomotive suddenly runs very fast.
Possible cause: Interfering signals from the layout have switched the
decoder to analogue mode. à As the origin of the interfering
signals´ often cannot be found, it is advisable to switch off the
automatic recognition of the analogue mode during digital
operation.
Possible cause:
decoder has switched the decoder to analogue mode. à If you
simulaneously control DCC and Motorola decoders, it is advisable to
switch off the automatic recognition of the analogue mode during
digital operation.
If you cannot find the problem, please return the decoder for repair
(address on the cover page).

Manufacturer's note

According to DIN VDE 0869, the person who brings the circuit into
operation by extension resp. mounting into a housing is the
manufacturer of the product. If he sells the product to another person
he is responsible for passing on all the relevant papers and to give his
name and address.

Certification

This product conforms with the EC- directive 89/336/EWG on
electromagnetic radiation and is therefore CE certified.
The changing direction impulse for a Motorola
English
Page 45