Table of Contents
Advertisement
LD-G-24
of 7 x 19 mm. Fix the heat sink on the diodes D1 to D4, using an
appropriate glue ( e.g. super glue ). Take care that the heat sink does not
contact the adjoining IC1. Risk of short circuit!
Using a NEM 652 interface connector
Some locomotives already have an NEM 652 interface connector
mounted. Using a convenient connecting plug you save disconnecting
the connections and you do not need to solder at the locomotive.
The list below shows how to connect the contacts of the interface
connector to the connecting points of the locomotive decoder.
Contact
Connection
1
Motor connection 1
2
Lighting back (-)
3
Not used or F1
4
Power supply left
5
Motor connection 2
6
Lighting front (-)
7
Common conductor
for all functions (+)
8
Power supply right
Colour of cable
orange
yellow
green
black
grey
white
blue
red
English
Connecting points
X11
X5
X7
X2
X12
X4
X3
X1
Page 39
Advertisement
Table of Contents
