Gate Drive Card - Danfoss VLT HVAC Drive FC100 Service Manual

Disassembly/Assembly - Inve...

8.2.7 Gate Drive Card

1. Disconnect cables from gate drive card connectors MK100, MK102, MK103, MK104, MK106, and, if unit has a brake
option MK105.
2. Remove gate drive card by removing 6 mounting screws (T25) from standoffs.
Reinstall in reverse order of this procedure. Tighten
mounting screws to 2.3 Nm (20 in-lbs).
1
1 MK104 (W)
2 MK103 (V)
3 MK102 (U)
High Power Service Manual for Modular F Frame Drives
2
3
®
MG90K202 - VLT is a registered Danfoss trademark
4
4 MK100
5 MK105 (brake option)
6 MK106
5
130BX256.10
6
117
8 8