Heatsink Fans - Danfoss VLT HVAC Drive FC100 Service Manual

Top Level Module Removal In...

7.2.4 Heatsink Fans

1. Remove panel to access fan by removing six nuts
(M5) securing panel in place.
2. Unplug fan electrical connector and remove two
nuts (M6) securing fan in place.
Reinstall in reverse order of disassembly.
NOTE
The plug for the fan is keyed to only fit one way. However,
if too much force is used, the plug can be forced the
wrong way.
1
7 7
2
3
4
1 Heatsink
2 Heatsink fan
3 Plug
4 Cover
106
High Power Service Manual for Modular F Frame Drives
130BX257.10
®
MG90K202 - VLT is a registered Danfoss trademark