Mechanical Installation; Siting; Environmental Conditions - THORLABS BBD101 User Manual

3.2 Mechanical Installation

3.2.1 Siting

The unit is designed to be mounted free standing on a shelf, benchtop or similar
surface.
When siting the unit, it should be positioned so as not to impede the
Ensure that proper airflow is maintained to the rear of the unit.

3.2.2 Environmental Conditions

Operation outside the following environmental limits may adversely affect
Location
Maximum altitude
Temperature range
Maximum Humidity
To ensure reliable operation the unit should not be exposed to corrosive agents or
excessive moisture, heat or dust.
If the unit has been stored at a low temperature or in an environment of high humidity,
it must be allowed to reach ambient conditions before being powered up.
operation of the rear panel power supply switch.
Indoor use only
2000 m
o
5 C to 40
Less than 80% RH (non-condensing) at 31°C
Single-Channel Brushless DC Servo Controller
Caution
Warning
operator safety.
o
C
13