Yeastar Technology TG400G User Manual page 62

sent out through SMS to the expected destinations.
Sending Email to SMS, the format of the email subject is as below:
port:[port];num:[number];code:[code];
Format of the Email Subject

port:[port]: optional setting. If don't specify a port, the TG gateway will send the SMS by the first
available GSM/3G/4G port.
Example: port:3;

num:[number]: required setting. Enter the destination number.
Example: num:15882025100;

code:[code]: optional Setting. If you set an access code of Email To SMS, enter the same PIN
code in the email subject.
Example: code:125485;
Procedure
1. Log in your email account, compose a new email.
2. Enter the SMS email address of TG gateway as the destination email address.
3. Enter the email subject.
4. Send the email.
Example: the following figure indicates that the SMS email address is spbx@yeastar.com, and
the destination number is 15880290900.
TG Series User Guide
62/104