Yeastar Technology TG400G User Manual page 102

3. Click Save and Apply Changes.
The system will start to trace the normal logs. You can check the normal log file on System Logs
page.
Trace Debug Logs
The system supports storing up to 2 debug log files. The maximum size of each log file is 10Mb. The
system will delete the debug log files after reboot.
Procedure
1. Navigate to Status > Reports > System Logs > Options.
2. Check the checkbox of Enable Debug Log.
3. (Optional) Enable SIP debug and RTP debug, enter the target debug IP address.
4. Click Save and Apply Changes.
The system starts to trace the asterisk debug logs. You can check the debug log file on System
Logs page.
Trace Web Logs
The system supports storing up to 2 files of web operation logs. The maximum size of each log file is
1Mb. When the system generates more than 2 normal log files, the system will replace the oldest file
with the new file.
Procedure
1. Navigate to Status > Reports > System Logs > Options.
2. Check the checkbox of Enable Web Log.
3. Click Save and Apply Changes.
The system will start to trace the web logs. You can check the web log file on System Logs
page.
TG Series User Guide
102/104