Matrox Veos User Manual page 10

Set the content channels
6
Press button 1 (
channel for monitor 1 (
button 2 (
for monitor 2 (
the buttons repeatedly to cycle through the
available content channels (
).
CH03
Connection overview – Repeater unit
Coaxial cables
Twisted pair
cables
Step-by-step connection setup – Repeater unit
Connect the coaxial cable
1
Connect the input coaxial cable to the input
coaxial connector (
Repeater unit.
10 Matrox Veos – User Guide
) to set the content
), and press
) to set the content channel
). You may need to press
,
CH01
Output coaxial
connectors
(BNC )
Output jacks
(RJ-45)
) on your
, or
CH02
Content channel buttons
Input coaxial
cable
Input coaxial
connector
(BNC ) Coaxial cable
Twisted pair
cable
Input jack
(RJ-45)