Connection Setup - Matrox Veos User Manual

Connection setup

This section describes how to connect your Matrox Veos product. Your Veos product consists of 3
components that work together to extend your graphics data over 100 meters per unit:
Master unit (required) – connects to your computer.
Display unit (required) – connects to your monitors. The input can come from a Master,
Display, or Repeater unit. The output can go to a Display or Repeater unit.
Repeater unit (optional) – connects to another Veos unit. The input can come from a
Master, Display, or Repeater unit. The output can go to a Display or Repeater unit.
The following is an example of a possible Veos setup.
Display unit
WARNING:
Make sure your units are located in a well ventilated area and nothing is blocking their
ventilation holes.
4 Matrox Veos – User Guide
Display unit
Because your units disperse heat, they may become warm during operation.
Master unit
Display unit
Repeater unit
Display unit
Repeater unit