Matrox Veos User Manual page 8

WARNING:
your computer is turned on, it may be using monitor settings that are specific to the
current monitor connections. Some devices may be permanently damaged if incorrect
settings are used.
Step-by-step connection setup – Display unit
Connect the coaxial cable
1
Connect the input coaxial cable to the input
coaxial connector (
unit.
To connect your Display unit to another
Veos unit (Display or Repeater), connect a
second coaxial cable to the output coaxial
connector (
Connect your monitors
2
If your monitor has a DVI connector,
connect it directly to the connector labeled
(
If your monitor has an HD-15 connector,
use a DVI-to-HD15 adapter included with
your Display unit to connect your monitor
to the monitor connector on your Display
unit.
If your monitor has an RS-232 serial port
connector, attach one end of your RS-232
serial cable to the connector on your
monitor. Attach the other end of the cable to
the DB-9 output connector (
your Display unit.
Note:
serial port connectors support daisy
chaining. For information on the
capabilities of your monitor, see your
monitor documentation.
8 Matrox Veos – User Guide
Don't change monitor connections while your computer is turned on. While
) on your Display
) on your Display unit.
) on your Display unit.
Some monitors that have RS-232
Input coaxial
cable
Output coaxial
cable
Monitor cable
) on
Serial cable