Table of Contents
Advertisement
7
Cause
Your monitor may not be properly connected.
1
Solution
Make sure your monitor is properly connected to the connector on your Display unit.
2
Solution
Make sure the monitor power cable is firmly in place.
3
Solution
Make sure the connection to the back of the monitor is firmly in place.
8
Cause
If your monitor supports multiple input sources (analog/digital), it may be configured to use
the wrong source.
1
Solution
Make sure your monitor is using the correct input source. For more information on selecting
the input source for your monitor, see your monitor documentation.
2
Solution
Change your connection setup to use a different input source.
Problem
After the startup screen, or after display settings are changed, the
screen image is garbled or unusable
(blank screen, rolling or overlapping screen images)
1
Cause
An unsupported display mode may have been selected.
1
Solution
If one of your displays is usable, use Matrox PowerDesk to change your display mode. For
more information, see Matrox PowerDesk help.
2
Solution
If all your displays are unusable, change your display resolution in Windows.
Restart your computer in VGA mode.
1
Windows 2000/XP/Vista –
a
b
2
Change your display resolution:
Windows 2000 –
a
b
18 Matrox Veos – User Guide
Click
Start
Shut Down
on your version and configuration of Windows, this part of the step may not be
necessary.)
If your primary monitor is unusable, see your system manual for information on
how to restart your computer using a hardware control.
Before Windows starts, press [F8] for the Windows startup menu to appear. (If [F8]
doesn't work, instead try pressing and holding [Ctrl] before Windows starts.)
Select "VGA mode" (or "Low resolution video"), then press [Enter].
Right-click your Windows desktop background, then click
Move the
slider to a lower setting, then click
Screen area
* to restart your computer. (* Depending
Restart
OK
.
Properties
Settings
.
OK
Advertisement
Table of Contents
