Matrox Veos User Manual page 12

Description of indicator lights
The indicator lights on your Veos units provide status information on your connection setup. The
following describes the different indicator lights on your Veos units:
Red indicator light
Master unit
Unsupported display
resolution is selected.
Display unit
No valid input signal is
Display unit
Coaxial cable may not be
(Content
unsupported coaxial cable
channel lights)
Repeater unit
After restarting your computer, the indicator lights on your Veos units should all be green. If the
indicator lights on your Veos units aren't green,
12 Matrox Veos – User Guide
Unit is powered.
Unit is powered.
detected.
Unit is powered.
connected or an
is connected.
Unit is powered.
Green indicator light
Valid input signal is
detected.
Valid input signal is
detected.
Coaxial cable is supported
and properly connected.
Valid input signal is
detected.
see "Troubleshooting", page
No indicator light (black)
Unit isn't powered.
Unit isn't powered.
Unit isn't powered.
Unit isn't powered.
14.