Matrox Veos User Manual page 5

Connection overview – Master unit
Matrox cable
(HD15-to-HD15)*
Matrox cable
(DVI-to-DVI)*
Power/USB cable
* Depending on your graphics hardware, you need to attach either the Matrox HD15-to-HD15 cable or the Matrox DVI-to-DVI
cable to the input connector on your Master unit.
Step-by-step connection setup – Master unit
Attach the Matrox cable
1
If your graphics hardware has a DVI
connector, attach one end of the Matrox
cable to the graphics connector on your
computer. Attach the other end of the cable
to the DVI input connector (
your Master unit.
If your graphics hardware has an HD-15
connector, attach one end of the Matrox
cable to the graphics connector on your
computer. Attach the other end of the cable
to the HD-15 input connector (
your Master unit.
Input connector Input connector
(DVI
(HD-15 )
) on
) on
Output coaxial
connector
)
(BNC )
Serial cable
Input connector
(Serial DB-9
Matrox cable
(DVI-to-DVI)
Matrox cable
(HD15-to-HD15)
Matrox Veos – User Guide
Coaxial cable
)
5