Matrox Veos User Manual page 6

Connect the coaxial cable
2
Connect your coaxial cable to the output
coaxial connector (
unit.
Connect the serial cable
3
(optional)
If you want to use a monitor that has an RS-
232 serial port connector, you need to
connect a serial cable to the DB-9 connector
on your Master unit.
Connect one end of your RS-232 serial cable
(sold separately) to the RS-232 connector on
your computer.
Connect the other end of your cable to the
DB-9 input connector (
Master unit.
Connect the Power/USB cable
4
Plug one end of the Power/USB cable
provided with your Master unit into the
USB connector (
Plug the power supply connector of the
Power/USB cable into the external power
supply provided with your Master unit.
Plug the USB connector into a USB port on
your computer.
Note:
properly, both the power supply connector
and USB connector of the Power/USB
cable must be plugged in at the same time.
6 Matrox Veos – User Guide
) on your Master
) on your
) on your Master unit.
For your Master unit to work
Coaxial cable
Serial cable
Power/USB cable
USB connector
Power supply
connector