Kyocera Triumph-Adler 357ci Operation Manual page 80

Using Convenient Fax Functions > Polling Communication
Using Polling Transmission
1
2
3
4
5
Cancelling Polling Transmissions
Select [Polling Box] on the Home screen.
Place the originals.
Display the screen.
Select [Store File].
Select the type of originals, scanning density, etc., as necessary.
The table below lists the items to be set.
Function
Duplex
Scan Resolution
Density
File Name Entry
Quiet Mode
Functions Original Size
Orig. Orientation
Original Image
Skip Blank Page
Continuous Scan
Job Finish Notice
For each of the functions, refer to the following:
Sending Faxes (page 3-1)
Machine's Operation Guide
Start storing.
Press the [Start] key. The originals are scanned and stored in the Polling box.
To cancel a polling transmission, delete the polling transmission original saved in the polling
box. For information on how to delete the saved original, refer to the following:
Deleting Originals in a Polling Box (page 5-20)
Select the type and binding of originals.
Set the resolution at which to scan originals.
Adjust density.
Adds a file name.
Lower print and scan speed for quiet processing.
Select the size of originals to be scanned.
Select the orientation of the original document top edge to
scan correct direction.
Select original image type.
When there are blank pages in a scanned document, this
function skips the blank pages and prints only pages that
are not blank.
Scan a large number of originals separately and then
produce as one job.
Sends a notice by an e-mail when a transmission is
complete.
5-16
Description