Table of Contents
Advertisement
Fax Settings > Default fax settings
Item
Dialing Mode (Inch version
only)
Retry Times
ECM TX
TX Start Speed
Cont Scan w/Platen
Reception
Item
Media Type
Reception Date/Time
Duplex Printing
Select the telephone line according to the type you are contracted with. Please note that
selecting a wrong telephone line will prevent you from sending fax.
Value: Tone(DTMF), Pulse(10PPS)
This item is included in the Quick Setup Wizard.
Quick Setup Wizard (Fax Setup) (page 2-7)
The number of retry times can be changed automatically.
Value: 0 - 14
This item is included in the Quick Setup Wizard.
Quick Setup Wizard (Fax Setup) (page 2-7)
Set whether ECM TX is performed.
ECM is a communication mode specified by the ITU-T (International Telecommunication Union)
that retransmits data when an error occurs. Fax machines that have ECM mode check for
errors as they communicate, preventing distortion of the image due to noise on the line and
other conditions.
Value: On, Off
NOTE
When there is a large amount of noise on the line, communication may take slightly longer than
when [Off] is selected.
Set the TX Start Speed.
When communication conditions are bad, the fax may not be transmitted correctly. In that case,
set a lower TX Start Speed.
Value: 9600bps, 14400bps, 33600bps
NOTE
Normally this should be used with the default setting.
Set the default settings for Continuous Scan, used when the original is placed on the platen for
transmission.
Value: Off, On
NOTE: When [On] is selected, this setting is given priority over Continuous Scan (FAX)
and Continuous Scan settings.
Continuous Scan (FAX) (page 8-6)
Continuous Scan (page 3-18)
Specify the paper type to be used for print output of the received fax.
Value: All Media Types, Plain, Rough, Vellum, Labels, Recycled, Bond, Cardstock, Color,
Envelope, Thick, Coated, High Quality, Custom 1-8
Media Type for Print Output (page 4-7)
Reception Date/Time function adds the reception date/time, sender information and number of
pages on the top of each page when the message is printed out. It is useful for confirming the
time of reception if the fax is from a different time zone.
Value: Off, On
Reception Date/Time (page 4-6)
When received multiple pages of data are the same width, they can be printed out on both
sides of paper having the same width as the data.
Value: Off, On
Duplex Printing (page 4-6)
Description
Description
8-8
Advertisement
Table of Contents
Troubleshooting
