Installation; Installing And Adjusting Camera - Eneo ISD-55P0010P0A Quick Installation Manual

Installation

Installation
For the operation of the Network Camera, it is necessary to connect a network cable for
data transmission, power connection from supplied power adapter. Depending on opera-
tion methods, it is possible to connect an alarm cable additionally.
The dome camera should be attached to a structural object, such as hard wood, wall stud
or ceiling rafter that supports the weight of the dome camera. For its fixation on different
locations, please consult with an installer.

Installing and Adjusting Camera

1. Make screw holes for the camera on the ceiling with Template Sheet.
2. Disassemble Camera Cover from the camera.
3. Fix the camera set using Anchors (3x) and Screws (3x) to the ceiling.
6
Template sheet
Top case
Bottom case & camera