Table of Contents
Advertisement
Administrator Information
Items
Access Authority
Community Name (Read Only)
Community Name (Read/Write)
SNMPv3 Settings
Items
Enable SNMPv3
User Name
Authentication Settings
Algorithm
Password
Confirm Password
Encryption Settings
Algorithm
Password
Confirm Password
Context Name
Related Information
"Controlling protocols" on page 494
&
"Protocols you can Enable or Disable" on page 494
&
>
Advanced Security Settings
Setting value and Description
Set the access authority when SNMPv1/v2c is enabled. Se-
lect Read Only or Read/Write.
Enter 0 to 32 ASCII (0x20 to 0x7E) characters.
Enter 0 to 32 ASCII (0x20 to 0x7E) characters.
Setting value and Description
SNMPv3 is enabled when the box is checked.
Enter between 1 and 32 characters using 1 byte characters.
Select an algorithm for an authentication for SNMPv3.
Enter the password for an authentication for SNMPv3.
Enter between 8 and 32 characters in ASCII (0x20-0x7E). If
you do not specify this, leave it blank.
Enter the password you configured for confirmation.
Select an algorithm for an encryption for SNMPv3.
Enter the password for an encryption for SNMPv3.
Enter between 8 and 32 characters in ASCII (0x20-0x7E). If
you do not specify this, leave it blank.
Enter the password you configured for confirmation.
Enter within 32 characters or less in Unicode (UTF-8). If you
do not specify this, leave it blank. The number of characters
that can be entered varies depending on the language.
498
>
Controlling Using Protocols
Advertisement
Table of Contents
