Installing The Tow Pole - Toro 68013 Operator's Manual

Model 68024
2

Installing the Tow Pole

Parts needed for this procedure:
1 Tow pole kit (sold separately)
Tow Pole Specifications
Purchase the tow pole kit (including fasteners) that
meets your needs from your Authorized Service
Dealer. The machine has the following tow pole
options:
Hitch Type
50 mm (2 inch) ball—stamped
50 mm (2 inch) ball—forged
Pintle
Installing the Tow Pole
1. Remove the bolt and nut from the tow pole
(Figure 6).
Figure 5
Length
78.7 cm (31 inches) or 127 cm
(50 inches)
78.7 cm (31 inches) or 127 cm
(50 inches)
78.7 cm (31 inches) or 127 cm
(50 inches)
g022149
1. Tow pole
2. Front post
3. Bolt
2. Slide the tow pole forward and align the hole in
the pole with the hole in the frame fitting
6).
3. Insert the bolt through the holes in the fitting and
the pole (Figure
4. Thread the nut onto the bolt and tighten them
until they are tight against the frame fitting
(Figure 6).
Note:
If the self-locking nylon insert in the
locknut wears with use, replace the nut with a
new Grade 5 or Grade 8 locknut.
11
Figure 6
4. Bolt hole
5. Frame fitting
6. Nut
6).
g019804
(Figure