Setup; Installing The Dump Handle - Toro 68013 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
1

Installing the Dump Handle

Parts needed for this procedure:
1 Dump handle
2 Bolt
2 Nut
Procedure
1. Cut the cable ties to remove the dump handle
from the underside of the grate.
2. Install the dump handle to the side of the drum
using 2 bolts and nuts as shown in
Figure 4, or Figure
model.
Description
Dump handle
Bolt
Nut
Tow pole kit (sold separately)
Safety chain (included with the tow pole
kit)
Connecting link (included with the tow
pole kit)
Figure
5, as appropriate for your
Qty.
1
2
2
1
1
2
3,
10
Use
Install the dump handle.
Install the tow pole (side-dump models
only).
Install the safety chain.
Figure 3
Models 68013, 68016, 68020
Figure 4
Models 68014, 68017, 68021
g022169
g022150