Installing The Safety Chain - Toro 68013 Operator's Manual

3

Installing the Safety Chain

Parts needed for this procedure:
1 Safety chain (included with the tow pole kit)
2 Connecting link (included with the tow pole kit)
Procedure
Safety chain and connecting link are included in the
tow pole kit (sold separately); refer to
Tow Pole (page 11).
Form a hook on the end of a bendable piece of rod or
stiff wire (not included) and install the safety chain and
connecting links as shown in
Note:
Ensure that approximately equal lengths of
safety chain extend from either side of the front post.
2 Installing the
Figure 7.
Figure 7
g035100
12