E-Mailing; Using The Automatic Document Feeder And Scanner Glass; Configuring The E-Mail Smtp Settings - Lexmark CX522 User Manual

E-mailing

E-mailing

Using the automatic document feeder and scanner glass

Automatic document feeder (ADF)
•
Use the ADF for multiple‑page or two-sided
documents.
•
Load an original document faceup. For multiple‑page
documents, make sure to align the leading edge
before loading.
•
Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
Configuring the e‑mail SMTP settings
Configure the Simple Mail Transfer Protocol (SMTP) settings to send a scanned document through e-mail. The
settings vary with each service provider. For more information, see
Before you begin, make sure that the printer is connected to a network.
Using the Settings menu in the printer
1
From the control panel, navigate to:
Settings > E‑mail > E‑mail Setup
For non-touch-screen printer models, press
2
Configure the settings.
Notes:
•
For more information on the password, see
•
For e‑mail service providers that are not on the list, contact your provider and ask for the settings.
Using the Embedded Web Server
1
Open a web browser, and then type the printer IP address in the address field.
Scanner glass
•
Use the scanner glass for single‑page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
•
Place the document facedown in the corner with the
arrow.
supported e‑mail service
to navigate through the settings.
e‑mail service providers.
51
providers.