Lexmark CX510 Copy Manual

Copy guide

Making a quick copy

1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
Note: To avoid a cropped image, make sure the size of the original document and the size of the copy paper are the same.
3
From the printer control panel, press

Copying using the ADF

1
Load an original document faceup, short edge first into the ADF tray.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
Adjust the paper guides.
3
From the home screen, navigate to:
Copy > specify the copy settings > Copy It

Copying using the scanner glass

1
Place an original document facedown on the scanner glass in the upper left corner.
2
From the home screen, navigate to:
Copy > specify the copy settings > Copy It
If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the next page.
3
Touch Finish the Job.

Copying photos

1
Place a photo facedown on the scanner glass in the upper left corner.
2
From the home screen, navigate to:
Copy > Content > Photo >
3
From the Content Source menu, select the appropriate setting that best matches the original photo.
.
Copy guide
Page 1 of 4