Set The Contacts; G Attendance Management ( Model B) - Coban GPS302 User Manual

successfully authorized, the unit will reply "admin ok!" in SMS.
5.6.3 Send SMS："noadmin+password+space+authorized number" to delete the authorized number.
5.6.4 For roaming purpose, you have to add your country code ahead of the cell phone number, for
example, please send："admin123456 +8613322221111" to tracker to set 13322221111 as an
authorized number.

5.7 Set the contacts

5.7.1 There are ①， ②， ③ these three button on the device and use to call the contacts phone number,
before that must set the contacts phone number by SMS.
5.7.2 Set the first contact person correspond the button ①
Send SMS "contact one+password+space+phone number",the device will reply "contact
5.7.3 Set the second contact person correspond the button ②
Send SMS "contact two+password+space+phone number",the device will reply "contact
5.7.4 Set the third contact person correspond the button ③
Send SMS "contact three+password+space+phone number",the device will reply "contact
ok".
5.7.5 Send SMS "nocontact +password"to delete the three phone number in the meantime. If need to
modify the three phone number can resend the correspond command to replace directly.

5.8. 2.4G Attendance Management ( Model B)

Optional Model B, built-in 2.4G transmitter module, can be used with attendance management center
and automatically manage personnel attendance.
5.
Optional 2.4G module, user can set the content of 2.4G module send. The default is to send the
IMEI number of the device. E.g., Set personnel ID number as the contents of the sending. Send
SMS message"pepleid+password+space+YB888888", YB888888 is ID,the content must be
Alphabet and Arabic numbers, it can not over 15 bytes.
one ok".
two ok".
three
7