Table of Contents
Advertisement
5 Clip metadata
The items for referencing clip properties (clip metadata) are displayed.
For details, refer to "Setting clip metadata" (page 119).
Modifying recorded clip metadata
1
Display the metadata details window for the clip to be modified on the clip properties screen.
2
Use the cursor buttons to place the cursor on the item to be modified. (Fig. 1)
The items of the metadata with the gray buttons in background can be modified.
3
Press the <SET> button.
Information about keyboard operation is the same as "Checking and modifying uploaded metadata" (page 120).
f The input window (software keyboard) for modifying metadata is displayed. (Fig. 2)
f Enter characters with the keyboard to modify the metadata.
4
Select [OK] on the keyboard.
The modified metadata is written on the clip and the screen returns to the metadata details window.
@
NOTE
t To delete each item in [LOCATION] (shooting location data) of [SHOOT], the item cannot be deleted alone. By setting the [ALTITUDE] item to empty,
other [LONGITUDE] and [LATITUDE] items are collectively deleted.
t Metadata of clips with
(incomplete clip indicator) cannot be repaired. Repair of metadata of clips recorded across multiple P2 cards must be
performed after inserting all of the P2 cards.
t Any [MEMO] with 101 characters or more cannot be modified.
Displaying P2 card status
r P2 card status display settings
You can select the P2 card status display from either remaining capacity or used capacity of the P2 card.
1
Press the <THUMBNAIL> button.
The thumbnail screen appears on the viewfinder.
2
Select [REMAIN] (remaining capacity) or [USED] (used capacity) in the main menu → [CLIP] → [PROPERTY] → [REMAIN SETUP].
(Fig. 1)
r P2 card status display items
Item
[REMAIN]
[USED]
Contents of P2 card status display settings
Select [CARD STATUS] in the main menu → [CLIP] → [PROPERTY].
Chapter 5 Playback — Thumbnail operations
Fig. 1
Displays remaining capacity on the P2 card as the P2 card status display. (Factory setting)
Displays used memory capacity on the P2 card as the P2 card status display.
Content of display
– 123 –
Fig. 2
Advertisement
Table of Contents
