Table of Contents
Advertisement
Item
[SKIN TONE DTL C]
[SKIN TONE ZEBRA]
[SKIN TONE DTL
[DETECT TABLE]
SETTING]
[SKIN TONE GET]
[SKIN DTL EFFECT]
[I CENTER]
[I WIDTH]
[Q WIDTH]
[Q PHASE]
[RB GAIN CONTROL
[R GAIN AWB PRE]
SETTING]
[B GAIN AWB PRE]
[R GAIN AWB A]
[B GAIN AWB A]
[R GAIN AWB B]
[B GAIN AWB B]
[AWB A GAIN OFFSET]
[AWB B GAIN OFFSET]
[COLOR TEMP Ach
[COLOR TEMP]
SETTING]
[R Gain]
Chapter 6 Menu Operations — Menu list
Selects the skin tone table that will display the skin tone detail.
Create the skin tone table with [DETECT TABLE]. You can shoot smoother skin tones by displaying the
skin tone detail. [SKIN TONE DTL C] can be used alone or used in combination with [SKIN TONE DTL A]
and [SKIN TONE DTL B].
[ON], [OFF]
f Factory setting: [OFF]
Set to display a zebra pattern in the skin tone area displayed in the viewfinder.
The zebra pattern is displayed when this item is set to [ON] and [SKIN TONE DTL A]/[SKIN TONE DTL B]/
[SKIN TONE DTL C] is activated.
The zebra pattern displays the area selected in [SKIN TONE DTL SETTING].
[ON], [OFF]
f Factory setting: [ON]
Selects the skin tone table of the subject that displays the skin tone detail.
[A], [B], [C]
f Factory setting: [A]
Obtains the color information of [A], [B], or [C] selected in [DETECT TABLE] from near the center marker.
If executed, data from [I CENTER] to [Q PHASE] are automatically obtained.
The obtained data becomes the table data of [A], [B], or [C] selected in [DETECT TABLE].
Multiple color information for [A], [B], and [C] cannot be obtained simultaneously.
Sets the effective level of the skin tone detail.
[0]...[31]
f Factory setting: [16]
Sets the center position of the upper I axis (setting the area that displays the skin tone).
[0]...[255]
f Factory setting: [35]
Sets the width of the area that displays the skin tone of the upper I axis that focus on [I CENTER].
[0]...[255]
f Factory setting: [55]
Sets the width of the area that displays the skin tone of the upper Q axis that focus on [I CENTER].
[0]...[90]
f Factory setting: [10]
Sets the phase of the area that displays the skin tone regarding to the Q axis.
[−180]...[179]
f Factory setting: [0]
Sets the Rch gain when the <WHITE BAL> switch is on <PRST>.
[−200]...[200]
f Factory setting: [0]
Sets the Bch gain when the <WHITE BAL> switch is on <PRST>.
[−200]...[200]
f Factory setting: [0]
Sets the Rch gain when the <WHITE BAL> switch is on <A>.
[−200]...[200]
f Factory setting: [0]
Sets the Bch gain when the <WHITE BAL> switch is on <A>.
[−200]...[200]
f Factory setting: [0]
Sets the Rch gain when the <WHITE BAL> switch is on <B>.
[−200]...[200]
f Factory setting: [0]
Sets the Bch gain when the <WHITE BAL> switch is on <B>.
[−200]...[200]
f Factory setting: [0]
Sets the Rch gain and Bch gain when performing automatic white balance after the <WHITE BAL> switch
is on <A>.
[ON]: Keeps the values set in [R GAIN AWB A] and [B GAIN AWB A].
[OFF]: Sets the value of Rch gain and Bch gain to [0].
f Factory setting: [OFF]
Sets the Rch gain and Bch gain when performing automatic white balance after the <WHITE BAL> switch
is on <B>.
[ON]: Keeps the values set in [R GAIN AWB B] and [B GAIN AWB B].
[OFF]: Sets the value of Rch gain and Bch gain to [0].
f Factory setting: [OFF]
Displays the color temperature when the <WHITE BAL> switch is at the <A> position and automatic white
balance is working, or when it is preset. Also, in automatic white balance operation, the color temperature
can be changed by changing the output balance of Rch and Bch.
[2000K]...[15000K]
f Factory setting: [3200K]
Displays the Rch output when the <WHITE BAL> switch is at the <A> position and automatic white
balance is working, or when it is preset. Also, in automatic white balance operation, the color can be
changed on the Rch axis by changing the output of Rch.
[−400]...[400]
f Factory setting: [0]
– 132 –
Description of settings
Advertisement
Table of Contents
