Scene File Screen; Camera Setup Screen - Panasonic AG-DVC60P Operating Instructions Manual

Menu configuration (cont.)

SCENE FILE screen

Item/
(Display
mode)
SCENE FILE Settings corresponding to four shooting con-
(CAM) ditions are saved as scene files in this cam-
era-recorder. Use this item to select the
scene file to be used.
1. SCENE1:
For files where the various menu settings
are normal.
2. SCENE2:
The same as SCENE 1 (this is an extra).
3. B.PRESS:
This file is useful for shooting dark areas
with a sharper contrast.
4. MOVIE-LIKE:
This file is useful for shooting movie-like
images.
<Note>
You can change the settings in the scene files
using the SETTING item.
SETTING Use this to change the settings in the scene
(CAM) files.
DETAIL LEVEL:
–7 --- 0 --- +7
Set this level in the "–" direction to soften
the image outlines.
When it is set in the "+" direction, the
image outlines are emphasized and sharp
images are produced, but the amount of
noise is increased slightly.
CHROMA LEVEL:
–7 --- 0 --- +7
Set this level in the "–" direction to make
the image colors lighter.
Set it in the "+" direction to make them
darker.
CHROMA PHASE:
–7 --- 0 --- +7
Use this to adjust the hue.
COLOR TEMP:
–7 --- 0 --- +7
Set this in the "–" direction to make the
images more reddish overall.
Set it in the "+" direction to make the
images more bluish overall.
MASTER PED:
–15 --- 0 --- +15
Set this in the "–" direction to make the
images darker overall. When a setting
below –5 is selected, the dark parts of the
images may become blackened out.
When it is set in the "+" direction, the dark
parts of the images (such as the shadows)
become brighter.
AE SHIFT:
–4 --- 0 --- +4
Use this to adjust the auto iris setting.
Set it in the "–" direction for a darker set-
ting.
Set it the "+" direction for a brighter set-
ting.
66
Description of settings
Item/
(Display Description of settings
mode)
SKIN TONE DTL:
OFF, ON
When ON is selected, soft skin tones are
reproduced when people are shot, making
them look more attractive.
REC MODE:
NORM
Shooting is performed using field record-
ing (60 fields per second).
FRAME
Shooting is performed using frame record-
ing (30 frames per second).
High-quality images can be obtained at
this setting when playing back still images,
for example.
NAME EDIT Use this to edit the name of the selected
(CAM) scene file.
SAVE/INIT SAVE:
(CAM) The changed settings in the scene file
(one of the files listed in the file selection
item) are saved.
The original scene file settings will be
restored
released, the operation is switched to the
VCR mode or when the power is turned off
if SAVE has not been selected.
INITIAL:
The selected scene file settings are
returned to the factory settings.
The underlining indicates the factory set-
ting.

CAMERA SETUP screen

Item/
(Display Description of settings
mode)
SYNCRO Use this to adjust the synchro scan shutter
SCAN speed used for shooting images on a TV
(CAM) screen, etc. (P38, 39)
1/60.3 --- 1/250
ASPECT Use this to select the aspect ratio of the
CONV images which are to be recorded. (P35)
(CAM) Cannot be changed during still shooting.
NORMAL, LETTER BOX, SQUEEZE
COLOR BAR Select ON to show the color bar.
(CAM) Cannot be changed during still shooting.
OFF, ON
SETUP Use this to add the setup level (black level).
(CAM) 0%:
The setup level is not added.
7.5%:
A 7.5% setup level is added for recording.
The underlining indicates the factory setting.
when the menu mode is