Table of Contents
Advertisement
Chapter 9 Connecting to External Devices — Connection through the <USB2.0> terminal
t To copy to a [TYPE S] storage device, one or more partitions are required. You can either format the storage device to [FAT] or perform copying after
creating a partition through the export process.
t To cancel the copy process, use the cursor buttons to place the cursor on [CANCEL] and press the <SET> button. On the [CANCEL] confirmation
message that appears, select [YES] and press the <SET> button. Clips copied halfway to the copy destination are deleted.
t If you have copied clips to a [TYPE S] storage device, you will not be able to import to that partition by card. Also, the part number display of the card
at that instance will display [UNKNOWN].
Storage device information display (explorer screen)
You can perform the following operations in the explorer screen display.
f Storage device information display
f Storage device partition or folder thumbnail display and selection
f Target partition or folder selection
Explorer screen can be displayed by selecting [STORAGE] in the main menu → [CLIP] → [EXPLORE].
1 Storage device indicator
This displays the connected / not connected status and the storage device type.
2 Display mode
This indicates that the explorer screen of the storage device is currently displayed.
3 Device information
f For [TYPE S] and [P2STORE] (storage devices that allow reading/writing by card)
[PARTITION]: [TYPE S]/[P2STORE]
[VENDOR]: Vendor name
[MODEL]: Model name
[SIZE]: Total capacity (unit: GB)
[USED]: Used capacity (unit: GB)
Used P2 card area (unit: number of clips), maximum of 23
[FREE CAP.]: Remaining capacity (unit: GB)
[SELECTED PART.]: Number of selected partition
f For [FAT] and [OTHER] (other storage devices)
[PARTITION]: [FAT]/[OTHER]
[VENDOR]: Vendor name
[MODEL]: Model name
[SIZE]: Total capacity (unit: GB)
[FREE CAP.]: Remaining capacity (unit: GB)
[SELECTED PART.]: Number of selected folder
4 Partition or folder information
f For [TYPE S] and [P2STORE] (partition information)
: Displays a checkmark when a target partition is selected.
[NO.]: Partition number
[MODEL]: Model name of P2 card
[PARTITION NAME]: Name assigned to the partition
[DATE]: Partition record date
[TIME]: Partition record time
[SERIAL]: P2 card serial number
f For [FAT] and [OTHER] (folder information)
: Displays a checkmark when a target partition is selected.
[NO.]: Folder number
[FOLDER NAME]: Folder name (excluding the CONTENTS folder)
[DATE]: Folder creation date
[TIME]: Folder creation time
@
NOTE
t For [TYPE S] storage devices, you can switch between the partition name and serial name display using the cursor buttons.
t If there is an invalid partition in [P2STORE], the partition information is displayed in gray.
2
3
1
– 180 –
4
Advertisement
Table of Contents
