Periodic Maintenance - Technogym RUN EXCITE LIVE 9000 User Manual

Periodic maintenance

WARNINGS
Periodic maintenance, adjustment and lubrication operations must be
performed by the Technogym Technical Support Service.
Before servicing, turn off the product by moving the switch to the 0
position and take the power plug out of the socket.
Perform the following maintenance once a year.
- Check the treadmill belt's state of wear (A).
- Clean the motor compartment with a vacuum cleaner (B).
- Check the state of wear of the treadmill's drive belt (C).
Running surface maintenance
At the end of the left side support (D), the warning light that indicates that
the treadmill belt is moving is also a Preventive Care Light.
This green warning light indicates the treadmill belt's state of wear and lights
up during standby.
If the light remains steady ON during standby, it means running surface
materials do not require maintenance.
If the light blinks during standby, it means running surface materials are
beginning to show signs of wear.
If the light flashes intermittently in flash groups, contact Technogym Technical
Support Service to have the materials serviced.
RUN EXCITE LIVE
B
27
D
A
C