Changing The Program Sequence - Miele TWB120WPT1 Operating Instructions Manual

Changing a program once it
has started
You cannot change to another program
once a program has started (this
prevents unintentional alterations).
If you try to change a program,  will
light up until the original program is
reset.
Exception: The dryer is switched off by
turning the program selector to the 
position.
You will need to cancel the current
program before you can select a new
one.

Risk of fire due to incorrect use
and operation.
The laundry can burn and destroy
the dryer and the surroundings.
Read and observe "IMPORTANT
SAFETY INSTRUCTIONS".

Changing the program sequence

Cancelling the current program
 Touch the Start/Stop sensor button.
The items will be cooled down,
depending on the temperature reached
and how long they have been dried for.
 will light up if you press the Start/
Stop sensor button again during the
cooling-down phase.
 Open the door.
If you would like to select another
program
You can also directly cancel a running
drying program if you immediately
select another program and start it.
 Turn the program selector to .
 Turn the program selector to another
program.
 Touch the Start/Stop sensor button.
Adding or removing laundry

Bear in mind that hot steam may
escape when the door is opened.
 Pull open the door.
 Add or remove items.
 Close the door.
 Touch the Start/Stop sensor button.
The program starts.
31