Miele TWB 120 WP Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dryer
  5. TWB 120 WP
  6. Operating instructions manual

Miele TWB 120 WP Operating Instructions Manual

Heat-pump dryer
Hide thumbs Also See for TWB 120 WP:
Table of Contents

Advertisement

Quick Links

Operating Instructions
Heat-pump Dryer
It is essential to read these operating instructions before installing,
starting up, and using the appliance. This prevents both personal injury
and damage to the appliance.
en-US
M.-Nr. 10 974 050

Advertisement

Table of Contents
loading

Related Manuals for Miele TWB 120 WP

Summary of Contents for Miele TWB 120 WP

  • Page 1 Operating Instructions Heat-pump Dryer It is essential to read these operating instructions before installing, starting up, and using the appliance. This prevents both personal injury and damage to the appliance. en-US M.-Nr. 10 974 050...

  • Page 2: Table Of Contents

    Contents Caring for the environment .................  5 IMPORTANT SAFETY INSTRUCTIONS .............. 6 Operating the tumble dryer ................ 14 Control panel ......................14 How the display works ..................15 Energy saving tips .................... 17 Functioning of the heat-pump dryer.............. 18 Initial set-up ...................... 19 Removing the protective film and stickers ............
  • Page 3 Contents Fragrance flacon.................... 34 Using the fragrance flacon ..................34 Removing the protective seal from the fragrance flacon........ 34 Inserting the fragrance flacon................ 35 Opening the fragrance flacon ................36 Closing the fragrance flacon ................. 36 Removing/replacing the fragrance flacon ............. 37 Cleaning and care ....................
  • Page 4 Contents Installation ......................57 Leveling the tumble dryer.................  57 Ventilation ...................... 57 Before moving the tumble dryer again .............  57 Additional installation requirements ..............58 Product dimensions ....................60 Dimensions.......................  60 Installation on a plinth .................. 60 Washer-dryer stack .................. 60 Electrical connection .....................

  • Page 5: Caring For The Environment

    Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed.

  • Page 6: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS  WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following:  WARNING This tumble dryer is intended for use in domestic households and similar working and residential environments.
  • Page 7 IMPORTANT SAFETY INSTRUCTIONS  Important information regarding use of fabric softener sheets: We do not recommend use of fabric softener sheets. Use of fabric softener sheets can clog the surfaces of the lint filters, extending the drying time and increasing energy consumption. During subsequent cleaning, the plastic and surfaces of the lint filters can be damaged! The best results are obtained by using liquid fabric softener in the washing machine.
  • Page 8 IMPORTANT SAFETY INSTRUCTIONS  To prevent the risk of fire, the following textiles must not be dried in this dryer: – items which have not been washed. – items, such as work-wear, exposed to grease, oils, or other deposits (such as lotions or cosmetics) in your dryer. If these items have not been thoroughly cleaned there is a danger that they may contribute to a chemical reaction that could cause the laundry to ignite when heated even after being removed from the...
  • Page 9 IMPORTANT SAFETY INSTRUCTIONS  Allow the dryer to complete each stage of the program selected, including the cooling down phase. This will ensure that the items being removed are not too hot to handle.  Clean the lint filter before or after each load. ...
  • Page 10 Miele tumble dryer and the Miele washing machine.  If you order a plinth for this tumble dryer (available from Miele as an optional accessory), make sure it is the correct one. ...
  • Page 11 IMPORTANT SAFETY INSTRUCTIONS  Heat-pump technology and refrigerant: The heat pump in this tumble dryer uses a gaseous refrigerant which is condensed by the compressor. The refrigerant, which is brought to a higher temperature level and liquified by condensing, is led in a closed circuit through the heat exchanger unit where heat exchange with the circulating drying air takes place.
  • Page 12 IMPORTANT SAFETY INSTRUCTIONS Using a fragrance flacon (optional accessory)  Only use genuine Miele original fragrance flacons.  Store the fragrance flacon in its original packaging.  Caution: The fragrance can leak out of the flacon! Make sure that you always keep the flacon, or the lint filter with the flacon inserted in it, in a horizontal position when carrying and do not tip or place it down on any surface.
  • Page 13 IMPORTANT SAFETY INSTRUCTIONS FCC Declaration of Conformity  This appliance complies with Part 15 of the FCC regulations. This appliance has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and is subject to the following conditions: This appliance does not cause harmful interference.

  • Page 14: Operating The Tumble Dryer

    Operating the tumble dryer Control panel a Display f Sensor buttons    for the time selection b Sensor buttons for the drying g Start/Stop sensor button levels for program start/cancellation c Indicator lights    h Optical interface light up when necessary for service technicians d Gentle sensor button...

  • Page 15: How The Display Works

    Operating the tumble dryer  Indicator lights How the display works –  lights up when the condensed water container needs to be emptied. –  lights up when the plinth filter needs to be cleaned. –  Perfect Dry The Perfect Dry system measures the residual moisture present in the laundry in programs with selectable...
  • Page 16 Operating the tumble dryer  Time display Drum lighting The remaining program duration will be The inside of the drum lights up so that displayed in hours and minutes. you don't forget any items of laundry when you empty it. With most program, the duration The drum lighting switches off displayed may vary or “jump”.

  • Page 17: Energy Saving Tips

    Energy saving tips This dryer with heat-pump technology is designed for energy-saving drying cycles. However, you can save a little more energy with the following measures as the drying time is not extended unnecessarily. – Make sure your laundry is spun at the maximum spin speed before drying.

  • Page 18: Functioning Of The Heat-Pump Dryer

    Functioning of the heat-pump dryer Two separate circuits ensure that the Refrigerant circuit laundry is dried: The refrigerant circuit regulates the heating and cooling of the drying air Dry air circuit through the heat exchanger. The heat The drying air flows through a heat pump is the central component: This exchanger, the drum, and several is a compressor that is connected to a...

  • Page 19: Initial Set-Up

    Initial set-up Removing the protective film and stickers  Remove: – The protective film from the door – Any stickers (if present) from the front and the lid Please do not remove any labels (e.g., the data plate) which are visible when you open the door.

  • Page 20: Notes On Correct Laundry Care

    1. Notes on correct laundry care Points to note regarding  Risk of fire due to incorrect use washed laundry and operation. The laundry can burn and destroy – When washing very heavily soiled the dryer and the surroundings. items, ensure that you use sufficient Read and observe “IMPORTANT detergent and select a high SAFETY INSTRUCTIONS”.

  • Page 21: Drying

    1. Notes on correct laundry care Understanding the care label Drying symbols Tip: See the “Program chart”. This describes the programs and gives Drying their maximum load.  Normal/higher temperature – Always observe the maximum  Low temperature* recommended load for each program. This will mean that the energy * Select Gentle consumption for the amount of...

  • Page 22: Loading The Tumble Dryer

    2. Loading the tumble dryer Socket for the fragrance flacon Loading the laundry The “Fragrance flacon” chapter Textiles may be damaged. describes how to use the fragrance Before loading, read “1. Notes on flacon. correct laundry care”. If you are not using a fragrance flacon: Push the tab down completely (see arrow) so that the socket is closed.

  • Page 23: Selecting A Program And Starting It

    3. Selecting a program and starting it Selecting drying levels during drying Selecting a program level programs The tumble dryer is switched on when you select a program and switched off Normal, Wrinkle-free, Delicates, Dress by turning the program selector to the Shirts, Express, Denims, Bed Linens, ...

  • Page 24: Time-Controlled And Other Programs

    3. Selecting a program and starting it Time-controlled and other programs Selecting Gentle Time Dry Delicate fabrics (with the  symbol on the care label, e.g., acrylic garments) You can set the duration in ten-minute are dried at a lower temperature and increments from ...

  • Page 25: Selecting Delay Start

    3. Selecting a program and starting it Sequence Selecting Delay Start – Delay start times of more than  will You can delay the start of a program count down in hours and then in from  minutes up to  hours. minutes until the start of the program.
  • Page 26 3. Selecting a program and starting it Energy savings Starting a program After 10 minutes, the indicators dim and  Touch the flashing Start/Stop sensor the Start/Stop sensor button starts button. flashing. The Start/Stop sensor button will light  Touch the Start/Stop sensor button to switch the indicators on again (this Notes does not have any effect on a running...

  • Page 27: Removing The Laundry At The End Of The Program

    4. Removing the laundry at the end of the program End of program/Anti-crease End of program:  lights up and the Start/Stop sensor button goes out. After the program has finished, the drum continues to rotate at intervals for a max. of 2 hours to reduce creasing. There is no Anti-crease phase with Woolens/Silks.

  • Page 28: Program Chart

    Program chart All weights marked with * are based on the weight of dry laundry. Normal Full load (17.6 lb/8 kg)* Extra, Normal Items Single and multi-layered cotton items. For example, T-shirts, underwear, baby clothes, workwear, jackets, covers, aprons, overalls, hand towels, bath towels, bathrobes, and bed linen. –...
  • Page 29 Program chart Smoothing Small load (2.2 lb/1 kg)* Normal, Hand iron Items – Cotton and linen fabric. – For easy care items made of cotton, mixed, or synthetic fiber. For example, pants, jackets, and shirts. – This program smoothes out creasing caused during the spin cycle in the washing machine.
  • Page 30 Program chart Outdoor Small load (5.5 lb/2.5 kg)* Normal, Hand iron Items Outdoor clothing which is suitable for drying in a tumble dryer. Proofing Small load (5.5 lb/2.5 kg)* Items For drying microfiber fabrics, skiwear, outdoor wear, fine, closeweave cotton garments (poplin), and table linen which are suitable for drying in a tumble dryer.

  • Page 31: Changing The Program Sequence

    Changing the program sequence Changing a program once it Cancelling the current program has started  Touch the Start/Stop sensor button. You cannot change to another program The items will be cooled down, once a program has started (this depending on the temperature reached prevents unintentional alterations).
  • Page 32 Changing the program sequence Adding laundry during ongoing delay start period You can open the door to add or remove laundry. – All program settings will be saved. – You can still change the drying level, if required.  Open the door. ...

  • Page 33: Condensed Water Container

    Condensed water container Emptying the condensed water container The condensed water is collected in the condensed water container. Empty the condensed water container after every drying program. The  indicator light will light up if the maximum level of the condensed water container is reached.

  • Page 34: Fragrance Flacon

    Fragrance flacon Removing the protective seal from Using the fragrance flacon the fragrance flacon Using the fragrance flacon (optional Only hold the fragrance flacon as accessory) will add a pleasant illustrated. Do not hold it at an angle fragrance to your laundry. or tip it as the fragrance will leak out of the flacon.

  • Page 35: Inserting The Fragrance Flacon

    Fragrance flacon Inserting the fragrance flacon  Open the door of the tumble dryer. The fragrance flacon is inserted in the upper lint filter next to the recessed grip. Markers  and  must line up with one another.  Open the cover using the tab until the tab is right at the top as shown.

  • Page 36: Opening The Fragrance Flacon

    Fragrance flacon Opening the fragrance flacon Closing the fragrance flacon Before drying, you can select the After drying, the fragrance flacon should intensity of the fragrance. be closed to prevent the fragrance from escaping needlessly.  Turn the outer ring clockwise: The ...

  • Page 37: Removing/Replacing The Fragrance Flacon

    – Always store in a cool, dry place Fragrance flacons are available to away from direct sunlight. order from Miele retailers or online. – When purchasing new fragrance flacons, only remove the protective seal just before use.

  • Page 38: Cleaning And Care

    Cleaning and care Lint filters This tumble dryer has 2 lint filters in the door opening: The upper and lower lint filters trap lint produced during the drying process. Clean the lint filters after each drying program. This prevents an extension of the program duration.
  • Page 39 Cleaning and care  Remove the lint (see arrows) from the  Turn the yellow dial on the lower lint filter surface of all the lint filters and filter in the direction of the arrow (until the perforated laundry deflector. you hear it click).

  • Page 40: Cleaning The Lint Filters With Water

    Cleaning and care Cleaning the lint filters with water  Wipe the smooth plastic surfaces of the lint filters with a damp cloth to clean them.  Flush the lint filters through with warm running water.  Shake the lint filters thoroughly and then dry them carefully.

  • Page 41: Cleaning Instructions When Using Fabric Softener Sheets

    Cleaning instructions when using Option 3 fabric softener sheets  Wet the surfaces of the lint filters with a liquid color detergent (e.g., Miele If you are using fabric softener sheets, Ultra Color Liquid Laundry Detergent). please follow these warnings and instructions.

  • Page 42: Cleaning The Plinth Filter

    Cleaning and care Removing the plinth filter Cleaning the plinth filter Clean the plinth filter whenever the  indicator light comes on or when the program duration is longer than usual. To turn the  indicator light off:  Open and close the door while the dryer is switched on.

  • Page 43: Cleaning The Plinth Filter

    Cleaning and care Cleaning the plinth filter Cleaning the plinth filter flap  Pull the handle out of the plinth filter.  Use a damp cloth to remove any lint.  You can brush off a heavy build-up of Make sure that you do not damage lint on the plinth filter or remove it the rubber seal when doing this.

  • Page 44: Checking The Heat Exchanger Unit

     First insert the handle with the plinth filter attached over the two guide pins:  Carefully vacuum up any visible lint or – The word Miele on the handle must dirt. be the correct way up.  Push the plinth filter in completely.

  • Page 45: Cleaning The Dryer

    Cleaning and care Cleaning the dryer  Damage or ineffective drying if drying takes place without a plinth Disconnect the tumble dryer from the filter or when the heat exchanger flap electrical supply. is open. Excessive accumulations of lint can ...

  • Page 46: Frequently Asked Questions

    Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Indicator lights or information on the time display Problem Possible cause and solution...
  • Page 47  Start a program. cancelled, a signal If the program is interrupted again and an error sounds. message appears, there is a fault. Contact Miele Technical Service. : lights up and the The laundry is unevenly distributed or has rolled up.

  • Page 48: Unsatisfactory Drying Results

    Frequently Asked Questions Unsatisfactory drying results Problem Possible cause and solution The laundry is not The load consisted of different types of fabric. sufficiently dry.  Finish drying using the Time Dry program.  Select a more suitable program next time. Useful tip: You can alter the drying levels for some programs.

  • Page 49: The Drying Cycle Duration Is Very Long

    Frequently Asked Questions The drying cycle duration is very long Problem Possible cause and solution The drying process The room in which the tumble dryer is located is too goes on too long or warm. even switches off.*  Ventilate the room thoroughly. Detergent residues, hair, and fine lint can clog the filters.

  • Page 50: Other Problems

    Frequently Asked Questions Other problems Problem Possible cause and solution You can hear operating This is not a fault. The compressor is operating. noises (buzzing/ These noises are quite normal and can be heard humming). when the compressor is operating. A program does not There is no obvious cause.

  • Page 51: Technical Service

    In the event of a fault which you cannot For further information, please refer to remedy yourself, please contact your your warranty booklet. Miele dealer or Miele Technical Service. Optional accessories Contact information for Miele Optional accessories for this tumble...
  • Page 52 Installation instructions Alteration rights reserved. Visit our website for all the current product specifications, technical appliance information, and warranty information. To avoid accidents or damage to the appliance, please read these instructions before installing and/or using it.

  • Page 53: Important Safety Instructions

     Install the clothes dryer according to the manufacturer's instructions and local codes.  Repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and could void the warranty. ...
  • Page 54  Do not install the machine in rooms where temperatures below freezing may occur.  If there is any doubt concerning installation, contact Miele’s Technical Service Department. 1-800-999-1360 TechService@mieleusa.com 1-800-565-6435 service@miele.ca SAVE THESE INSTRUCTIONS...

  • Page 55: Installation And Connection

    Installation and connection Front view a Drain hose for condensed water e Door – do not open during drying b Power cord f Access panel to the heat exchanger –  Observe the section entitled and plinth filter “Electrical connection”. –...

  • Page 56: Rear View

    Installation and connection Rear view  If the tumble dryer is being transported on its side, it must be tipped onto its left or right side. a Protruding lid for holding when  If the tumble dryer is being moving the tumble dryer (see transported upright and you are using arrows) a hand truck, you must transport it...

  • Page 57: Installation

    Installation and connection Ventilation Installation The cool air intake at the front of the Leveling the tumble dryer dryer must not be blocked or  covered. This would hinder a Ensure that no closeable door, sufficient intake of cool air for the sliding door, or an oppositely hinged heat exchanger.

  • Page 58: Additional Installation Requirements

    Installation and connection Installing the dryer in a closet Additional installation requirements Minimum installation distance  All installations must be carried  You must insert sufficiently large out in accordance with local ventilation openings into the closet regulations. door. You can also open the closet door slightly while the dryer is Slot-in operating.
  • Page 59 Installation and connection Installing the dryer in a floor-to-ceiling closet You can also insert a ventilation opening at the top of the closet. In addition, you must also provide an opening on the bottom side of the closet door. Direct ventilation is also possible via an air conditioning outlet in the closet.

  • Page 60: Product Dimensions

    Installation and connection Washer-dryer stack Product dimensions – WTV502 or WTV512 Dimensions  5.2 ft (1.6 m) drain hose, detachable, top right on the rear  6.5 ft (2 m) power cord, bottom right on the rear Installation on a plinth – WTS 510...

  • Page 61: Electrical Connection

    Miele (USA or inspected by a qualified electrician. CDN). Miele cannot be held liable for the consequences of an inadequate grounding system. The electrical socket must be easily accessible so that the dryer can be disconnected from the electricity supply.

  • Page 62: External Draining Of Condensed Water

    Installation and connection External draining of condensed water Note When drying is in progress, condensed water is pumped into the condensed water container through the drain hose which is located at the back of the dryer. The condensed water can also be externally drained away via the drain hose on the back of the dryer.

  • Page 63: Changing The Door Hinging

    Installation and connection  Hold the door securely and pull it Changing the door hinging forwards: to remove the door you will You can change the door hinging on need to pull the base plate of the this tumble dryer yourself. hinge with its 2 pins out of the dryer.
  • Page 64 Installation and connection  Turn the door lock by 180°. 3. Remove the lock catch from the door  Press the door lock into the openings  First take the rubber seal off the door  on the opposite side of the door and place this to one side.
  • Page 65 Installation and connection 4. Dismantle the door hinge from the door The door hinge cover must be unclipped from position  and then removed.  Remove the lock catch from the cover. This lock catch cover is no longer needed. ...
  • Page 66 Installation and connection 5. Change the door hinge on the door Tip: In some circumstances, the rods can be difficult to dislodge. Moving the The door hinge is secured to the door screwdriver with a levering action while with 2 angled rods. These rods need pulling at the same time may help to to be removed with a screwdriver or work the rods free.
  • Page 67 Installation and connection 6. Change the lock catch on the door  You now need the new door hinge cover supplied with the dryer.  You now need the new lock catch cover supplied with the dryer which you have already fitted with the lock catch.

  • Page 68: Refitting

    Installation and connection Refitting  Now that you have changed the door hinging, the door will open from 7. Refit the door the opposite side.  Press the rubber seal back into the groove on the door.  Push the orange marker round to the other side so that you will see at ...

  • Page 69: Technical Data

    Technical data Height 33 7/16" (850 mm) Width 23 7/16" (596 mm) Depth 25 5/16" (643 mm) Depth with door open 42 3/8" (1077 mm) Slot-in Stackable Weight Approx. 137 lbs (62 kg) Drum volume 31.7 gal (120 l) Load quantity 17.6 lb (8 kg) dry laundry Capacity of condensed water container 1.27 gal (4.8 l) Hose length 63"...

  • Page 70: Programmable Functions

    Programmable functions Choosing and selecting Programming programmable functions You can use the programmable The number of the programmable functions to alter the dryer's function will appear on the display as electronics to suit your requirements.  and a number: Programming is carried out in these e.g., .
  • Page 71 Programmable functions Editing and saving the programmable The number of the programmable function function, e.g., , will then light up again. You can either switch a programmable function on or off or select different Exiting the programming level options.  Turn the program selector to the  position.

  • Page 72: Drying Levels "Normal

    Programmable functions  Drying levels “Normal”  Buzzer volume You can adjust the drying levels for the The buzzer volume can be changed. Normal program to one of seven You will hear it as it changes. different levels.  = Quieter Options ...

  • Page 73: Code

    Programmable functions  Code  Conductivity The code prevents your dryer being This programmable function should used without your knowledge. only be altered if the water is so soft that it is likely to cause the electronics When the code has been activated, you which sense residual moisture in the have to enter the code after switching laundry to give false readings.

  • Page 74: Display Switch-Off Status

    Programmable functions  Display switch-off status  Appliance switch-off To save energy, the time display and The dryer switches off automatically sensor buttons will go out after after 15 minutes to save energy. This 10 minutes, and only the Start/Stop time can be extended or reduced. sensor button will flash.

  • Page 75: Memory

    Programmable functions  Memory  Buzzer on You can set the following: The The buzzer sounds to let you know the electronic module will save the drying program has finished. It can be level and any options selected for the switched on or off.

  • Page 76: Airway Indicator

    Programmable functions  Airway indicator  Display brightness dimmed Lint should be removed after drying. The brightness of the dimmed sensor The  indicator light will also come buttons on the display can be set to on when a certain amount of lint has one of seven different levels.
  • Page 79 Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive Phone: 800-843-7231 Vaughan, ON L4K 4V8 609-419-4298 Fax: www.miele.ca www.mieleusa.com...
  • Page 80 TWB 120 WP en-US M.-Nr. 10 974 050 / 01...

This manual is also suitable for:

T1 series

Table of Contents