Table of Contents
Advertisement
, WARNING – Fire hazard
Follow the installation instructions in order to reduce the risk of
serious or fatal injury.
The installation of the tumble dryer must be carried out by a
qualified specialist.
The tumble dryer must be installed in accordance with local
regulations.
Unauthorized repairs could result in unforeseen dangers for the
user, for which Miele cannot accept liability. Repairs should only be
carried out by a Miele approved service technician, otherwise any
subsequent damage will not be covered by the warranty.
In the event of a fault or during cleaning and maintenance, the
tumble dryer is only completely disconnected from the electricity
supply when the tumble dryer plug has been removed or if the fuse
has been disconnected or if the screw-out fuse has been removed.
Do not switch on the supply until the task has been completed.
GROUNDING INSTRUCTIONS
The electrical safety of this dryer can only be guaranteed when
continuity is complete between it and an effective grounding system.
It is essential that this standard safety requirement is observed and
regularly tested. If in any doubt, please have the electrical installation
inspected by a qualified electrician. Miele cannot be held liable for
the consequences of an inadequate grounding system. The electrical
socket must be easily accessible so that the dryer can be
disconnected from the electricity supply.
WARNING – If the grounding conductor is connected incorrectly,
this can result in electric shock. Contact a qualified electrician if you
are unsure whether the appliance is properly grounded.
Do not change the plug: If it does not fit into the socket, you
should have a proper outlet installed by a qualified electrician.
WARNING AND SAFETY INSTRUCTIONS
53
Advertisement
Table of Contents
