Table of Contents
Advertisement
Programmable functions
Programming
You can use the programmable
functions to alter the dryer's
electronics to suit your requirements.
Programming is carried out in these
steps (, , ... ) using the sensor
buttons.
Accessing the programming level
Before you begin, ensure the following:
- The dryer is switched on and any
program is selected.
- The door of the dryer is open.
Touch the Start/Stop sensor button
and hold it down during steps -.
Close the dryer door.
Wait until the Start/Stop sensor
button, which will now be flashing
quickly, lights up constantly ...
... and then release the Start/Stop
sensor button.
will light up on the time display.
70
Choosing and selecting
programmable functions
The number of the programmable
function will appear on the display as
and a number:
e.g., .
Touch the or sensor button to
scroll to the next or previous
programmable function:
Programmable function
Drying levels "Normal"
Drying levels "Wrinkle-free"
Buzzer volume
Keypad tone
Code
Conductivity
Display switch-off status
Appliance switch-off
Memory
Anti-crease
Buzzer on
Airway indicator
Display brightness dimmed
Confirm the selected programmable
function by touching the Start/Stop
sensor button.
Advertisement
Table of Contents
