Table of Contents
Related Manuals for Miele TWB120WPT1
Summary of Contents for Miele TWB120WPT1
- Page 1 Operating instructions Heat-pump dryer It is essential to read these operating instructions before installation or use of this appliance. This prevents both personal injury and damage to the appliance. en-CA M.-Nr. 10 994 801...
-
Page 2: Table Of Contents
Contents Caring for the environment ................WARNING AND SAFETY INSTRUCTIONS ............Operating the tumble dryer ................14 Control panel ....................... 14 How the display works ..................15 Energy saving tips ..................... 17 Functioning of the heat-pump dryer..............18 Initial commissioning ..................19 Downtime after installation.................. - Page 3 Contents Fragrance capsule..................... 34 FragranceDos ...................... 34 Removing the protective seal from the fragrance flacon........ 34 Inserting the fragrance flacon................. 35 Opening the fragrance flacon ................36 Closing the fragrance flacon ................36 Removing/replacing the fragrance flacon ............37 Cleaning and care ..................... 38 Cleaning the lint filters ..................
- Page 4 Contents Installation ......................57 Installation ...................... 57 Downtime after installation................57 Ventilation ....................... 57 Before moving the tumble dryer again ............57 Additional installation requirements ..............58 Product dimensions .................... 60 Dimensions..................... 60 Installation on a plinth ..................60 Washer-dryer stack ..................60 Electrical connection ...................
-
Page 5: Caring For The Environment
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed. -
Page 6: Warning And Safety Instructions
Unauthorized repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Do not make any alterations to the tumble dryer, unless authorized to do so by Miele. Repairs should only be carried out by a Miele approved service technician, otherwise there could be a considerable danger to the user. - Page 7 WARNING AND SAFETY INSTRUCTIONS Important information regarding use of fabric softener sheets: We do not recommend use of fabric softener sheets. Use of fabric softener sheets can clog the surfaces of the lint filters, extending the drying time and increasing energy consumption. During subsequent cleaning, the plastic and surfaces of the lint filters can be damaged! The best results are obtained by using liquid fabric softener in the washing machine.
- Page 8 WARNING AND SAFETY INSTRUCTIONS To prevent the risk of fire, the following items must not be tumble dried: - Items which have not been washed. - Items which have not been thoroughly cleaned and are still soiled with grease, oil or other deposits (such as work clothes, kitchen linens or cosmetics cloths with lubricants, cooking oils, grease, lotions, etc, as there is a danger that they might ignite when heated (chemical reaction), even after they have been removed...
- Page 9 It is essential that this standard safety requirement is observed and regularly tested. If in any doubt, please have the electrical installation inspected by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate grounding system. The electrical socket must be easily accessible so that the dryer can be disconnected from the electricity supply.
- Page 10 Miele tumble dryer and the Miele washing machine. If you order a plinth for this tumble dryer (available from Miele as an optional accessory), make sure it is the correct one. ...
- Page 11 WARNING AND SAFETY INSTRUCTIONS Heat pump technology and refrigerant: The heat pump in this tumble dryer uses a gaseous refrigerant which is condensed by the compressor. The refrigerant, which is brought to a higher temperature level and liquefied by condensing, is led in a closed circuit through the heat exchanger unit where heat exchange with the circulating drying air takes place.
- Page 12 WARNING AND SAFETY INSTRUCTIONS Using a fragrance capsule (optional accessory) Only use genuine Miele original fragrance capsules. The fragrance capsule must be stored in its original packaging so please make sure you retain this. Caution: The fragrance can leak out of the capsule! Make sure...
- Page 13 WARNING AND SAFETY INSTRUCTIONS FCC Declaration of Conformity This appliance complies with Part 15 of the FCC regulations. This appliance has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and is subject to the following conditions: This appliance does not cause harmful interference.
-
Page 14: Operating The Tumble Dryer
Operating the tumble dryer Control panel a Display f Sensor buttons for the time selection b Sensor buttons for the drying g Start/Stop sensor button levels for program start/cancellation c Indicator lights h Optical interface light up when necessary for service technicians d Gentle sensor button... -
Page 15: How The Display Works
Operating the tumble dryer Indicator lights How the display works - lights up when the condensed water container needs to be emptied. - lights up when the plinth filter needs to be cleaned. - Perfect Dry The Perfect Dry system measures the residual moisture present in the laundry in programs with selectable... - Page 16 Operating the tumble dryer Time display Drum lighting The remaining program duration will be The inside of the drum lights up so that displayed in hours and minutes. you don't forget any items of laundry when you empty it. With most program, the duration The drum lighting will go out displayed may vary or “jump”.
-
Page 17: Energy Saving Tips
Energy saving tips This dryer with heat pump technology is designed for energy-saving drying cycles. However, you can save a little more energy with the following measures as the drying time is not extended unnecessarily. - Make sure your laundry is spun at the maximum spin speed in the washing machine before drying. -
Page 18: Functioning Of The Heat-Pump Dryer
Functioning of the heat-pump dryer Two separate circuits ensure that the Refrigerant circuit laundry is dried: The refrigerant circuit regulates the heating and cooling of the drying air Dry air circuit through the heat exchanger. The heat The drying air flows through a heat pump is the central component: This exchanger, the drum and several is a compressor that is connected to a... -
Page 19: Initial Commissioning
Initial commissioning Downtime after installation Damage caused by switching the appliance on too soon. This can damage the heat pump. After setting up the tumble dryer, wait for at least one hour before starting a drying program. Removing the protective foil and stickers ... -
Page 20: Notes On Correct Laundry Care
1. Notes on correct laundry care Points to note regarding Risk of fire due to incorrect use washed laundry and operation. The laundry can burn and destroy - When washing very heavily soiled the tumble dryer and the items, ensure that you use sufficient surroundings. -
Page 21: Drying
1. Notes on correct laundry care Understanding the care-label Drying symbols Useful tip: See the “Program chart”. This describes the programs and gives Drying their maximum load. Normal / higher temperature - Always observe the maximum Low temperature* recommended load for each program. This will mean that the energy *Select Gentle consumption for the amount of... -
Page 22: Loading The Tumble Dryer
2. Loading the tumble dryer Socket for the fragrance flacon Loading the laundry The “Fragrance flacon” chapter Textiles may be damaged. describes how to use the fragrance Before loading, read “1. Notes on flacon. correct laundry care”. If you are not using a fragrance flacon: Push the tab down completely (see arrow) so that the socket is closed. -
Page 23: Selecting A Program And Starting It
3. Selecting a program and starting it Selecting the drying level for Selecting a program programs with a selectable drying The tumble dryer is switched on when level you select a program and switched off by turning the program selector to the Normal, Wrinkle-free, Delicates, Dress ... -
Page 24: Time-Controlled And Other Programs
3. Selecting a program and starting it Time-controlled and other programs Selecting Gentle Time Dry Delicate fabrics (with the symbol on the care label, e.g., acrylic garments) You can set the duration in ten-minute are dried at a lower temperature and increments from ... -
Page 25: Selecting Delay Start
3. Selecting a program and starting it Sequence Selecting Delay Start - Delay start times of more than will You can delay the start of a program count down in hours and then in from minutes up to hours. minutes until the start of the program. - Page 26 3. Selecting a program and starting it Energy savings Starting a program After 10 minutes, the indicators dim and Touch the flashing Start/Stop sensor the Start/Stop sensor button starts button. flashing. The Start/Stop sensor button will light Touch the Start/Stop sensor button to switch the indicators on again (this Notes does not have any effect on a running...
-
Page 27: Removing The Laundry At The End Of The Program
4. Removing the laundry at the end of the program Remove the laundry. End of program/Anti-crease End of program: lights up and the Check that all items have been Start/Stop sensor button goes out. removed from the drum! If items are left in the dryer, they The dryer will switch off automatically. -
Page 28: Program Chart
Program chart All weights marked with * are based on the weight of dry laundry. Normal Full load (17.6 lb/8 kg)* Extra, Normal Items Single and multi-layered cotton items. For example, T-shirts, underwear, baby clothes, workwear, jackets, covers, aprons, overalls, hand towels, bath towels, bathrobes, and flannelette/bed linen. - Page 29 Program chart Smoothing Small load (2.2 lb/1 kg)* Normal, Hand iron Items - Cotton and linen fabric. - For easy care items made of cotton, mixed, or synthetic fiber. For example, pants, jackets, and shirts. - This program smoothes out creasing caused during the spin cycle in the washing machine.
- Page 30 Program chart Outdoor Small load (5.5 lb/2.5 kg)* Normal, Hand iron Items Outdoor clothing which is suitable for drying in a tumble dryer. Proofing Small load (5.5 lb/2.5 kg)* Items For drying microfibre fabrics, skiwear, outerwear, fine, closeweave cotton garments (poplin) and table linen which are suitable for drying in a tumble dryer.
-
Page 31: Changing The Program Sequence
Changing the program sequence Changing a program once it Cancelling the current program has started Touch the Start/Stop sensor button. You cannot change to another program The items will be cooled down, once a program has started (this depending on the temperature reached prevents unintentional alterations). - Page 32 Changing the program sequence Adding laundry during ongoing delay start period You can open the door to add or remove laundry. - All program settings will be saved. - You can still change the drying level, if required. Open the door. ...
-
Page 33: Condensed Water Container
Condensed water container Emptying the condensed water container The condensed water is collected in the condensed water container. Empty the condensed water container after every drying program. The indicator light will light up if the maximum level of the condensed water container is reached. -
Page 34: Fragrance Capsule
Fragrance capsule Removing the protective seal from FragranceDos the fragrance flacon Fragrance capsules (optional Only hold the fragrance flacon as accessories) can be used to give your illustrated. Do not hold it at an angle laundry a pleasant scent. or tip it as the fragrance will leak out Useful tip: You can simply close the of the pod. -
Page 35: Inserting The Fragrance Flacon
Fragrance capsule Inserting the fragrance flacon Open the door of the tumble dryer. The fragrance flacon is inserted in the upper lint filter next to the recessed grip. Markers and must line up with one another. Open the cover using the tab until the tab is right at the top as shown. -
Page 36: Opening The Fragrance Flacon
Fragrance capsule Opening the fragrance flacon Closing the fragrance flacon Before drying, you can select the After drying, the fragrance flacon should intensity of the fragrance. be closed to prevent the fragrance from escaping needlessly. Turn the outer ring clockwise: The ... -
Page 37: Removing/Replacing The Fragrance Flacon
- Always store in a cool, dry place Fragrance flacons are available to away from direct sunlight. order from Miele retailers or online. - When purchasing new fragrance flacons, only remove the protective seal just before use. -
Page 38: Cleaning And Care
Cleaning and care Cleaning the lint filters This tumble dryer has 2 lint filters in the door opening: The upper and lower lint filters trap lint produced during the drying process. Clean the lint filters after each drying program. This prevents an extension of the program duration. -
Page 39: Cleaning The Lint Filters And Air Flow Openings Thoroughly
Cleaning and care Remove the lint (see arrows) from the Turn the yellow knob on the lower lint filter surface of all the lint filters and filter in the direction of the arrow (until the perforated laundry deflector. you hear it click). -
Page 40: Cleaning The Lint Filters With Water
Cleaning and care Cleaning the lint filters with water Wipe the smooth plastic surfaces of the lint filters with a damp cloth to clean them. Rinse the lint filters through with warm running water. Shake the lint filters thoroughly and then dry them carefully. -
Page 41: Cleaning Instructions When Using Fabric Softener Sheets
Cleaning instructions when using Option 3 fabric softener sheets Wet the surfaces of the lint filters with a liquid colour detergent (e.g. Miele If you are using fabric softener sheets, Ultra Colour Liquid Laundry please follow these warnings and Detergent). -
Page 42: Cleaning The Plinth Filter
Cleaning and care Removing the plinth filter Cleaning the plinth filter Clean the plinth filter whenever the indicator light comes on or when the program duration is longer than usual. To turn the indicator light off: Open and close the door while the dryer is switched on. -
Page 43: Cleaning The Plinth Filter
Cleaning and care Cleaning the plinth filter Cleaning the plinth filter flap Pull the handle out of the plinth filter. Use a damp cloth to remove any lint. You can brush off a heavy build-up of Make sure that you do not damage lint on the plinth filter or remove it the rubber seal when doing this! with a vacuum cleaner. -
Page 44: Checking The Heat Exchanger Unit
First insert the handle with the plinth filter attached over the two guide pins: - The word Miele on the handle must be the correct way up! Push the plinth filter in completely. The act of pushing in the plinth filter will also push in the right-hand guide pin. -
Page 45: Cleaning The Tumble Dryer
Cleaning and care Cleaning the tumble dryer The dryer can only be operated with the plinth filter fitted correctly Disconnect the tumble dryer from the and the heat exchanger access panel electrical supply. closed. The access panel must be closed correctly to ensure that water ... -
Page 46: Frequently Asked Questions
Frequently Asked Questions With the help of the following guide, minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This will save you time and money because you won't need a service call. - Page 47 Start a program. cancelled, a signal If the program is interrupted again and an error sounds. message appears, there is a fault. Contact Miele Technical Service. : lights up and the The laundry is unevenly distributed or has rolled up.
-
Page 48: Unsatisfactory Drying Results
Frequently Asked Questions Unsatisfactory drying results Problem Possible cause and solution The laundry is not The load consisted of different types of fabric. sufficiently dry. Finish drying using the Time Dry program. Select a more suitable program next time. Useful tip: You can alter the drying levels for some programs. -
Page 49: The Drying Cycle Duration Is Very Long
Frequently Asked Questions The drying cycle duration is very long Problem Possible cause and solution The drying process The room in which the tumble dryer is located is too goes on too long or warm. even switches off.* Ventilate the room thoroughly. Detergent residues, hair, and fine lint can clog the filters. -
Page 50: Other Problems
Frequently Asked Questions Other problems Problem Possible cause and solution You can hear operating This is not a fault. The compressor is operating. noises (buzzing/ These noises are quite normal and can be heard humming). when the compressor is operating. A program does not There is no obvious cause. -
Page 51: Technical Service
Optional accessories Contact information for Miele Service Optional accessories for this tumble can be found at the end of this dryer are available from Miele Technical document. Service. Please quote the model identifier and You also can order these and many... - Page 52 Installation instructions Alteration rights reserved. Visit our website for all the current product specifications, technical appliance information, and warranty information. To avoid accidents or damage to the appliance, please read these instructions before installing and/or using it.
-
Page 53: Warning And Safety Instructions
Unauthorized repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be carried out by a Miele approved service technician, otherwise any subsequent damage will not be covered by the warranty. - Page 54 This dryer is not intended for wall-insert. Should you have any questions regarding installation, please get in touch at: 1-800-999-1360 techserv@mieleusa.com 1-800-565-6435 service@miele.ca KEEP THESE OPERATING INSTRUCTIONS IN A SAFE PLACE...
-
Page 55: Installation
*INSTALLATION* Installation Front view a Drain hose for condensed water e Door – do not open during drying b Power cord f Access panel to the heat exchanger – Observe the section entitled and plinth filter “Electrical connection”! – do not open during drying c Control panel g Cold air intake grille d Condensed water container... -
Page 56: Rear View
*INSTALLATION* Installation Rear view If the tumble dryer is being transported on its side, it must be tipped onto its left or right side. a Protruding lid for holding when If the tumble dryer is being moving the tumble dryer (see transported upright and you are using arrows) a hand truck, you must transport it... -
Page 57: Installation
*INSTALLATION* Installation Downtime after installation Installation Damage caused by switching the Installation appliance on too soon. Levelling the tumble dryer This can damage the heat pump. After setting up the tumble dryer, Ensure that no closeable door, wait for at least one hour before sliding door or an oppositely hinged starting a drying program. -
Page 58: Additional Installation Requirements
*INSTALLATION* Installation the condensed water container (which Installing the dryer in a closet you will need to empty again) or out Minimum installation distance through the drain hose. You must insert sufficiently large Additional installation ventilation openings into the closet requirements door. - Page 59 *INSTALLATION* Installation Installing the dryer in a floor-to-ceiling closet You can also insert a ventilation opening at the top of the closet. In addition, you must also provide an opening on the bottom side of the closet door. Direct ventilation is also possible via an air conditioning outlet in the closet.
-
Page 60: Product Dimensions
*INSTALLATION* Installation Washer-dryer stack Product dimensions - WTV502 or WTV512 Dimensions 1.60 m drain hose, detachable, top right on the rear 2 m wiring, bottom right on the rear Installation on a plinth - WTS 510... -
Page 61: Electrical Connection
Miele inspected by a qualified electrician. (USA or CDN). Miele cannot be held liable for the consequences of an inadequate grounding system. The electrical socket must be easily accessible so that the dryer can be disconnected from the electricity supply. -
Page 62: External Draining Of Condensed Water
*INSTALLATION* Installation External draining of condensed water Note When drying is in progress, condensed water is pumped into the condensed water container through the drain hose which is located at the back of the dryer. The condensed water can also be externally drained away via the drain hose on the back of the dryer. -
Page 63: Changing The Door Hinging
*INSTALLATION* Installation Hold the door securely and pull it Changing the door hinging forwards: to remove the door you will You can change the door hinging on need to pull the base plate of the this tumble dryer yourself. hinge with its 2 pins out of the dryer. - Page 64 *INSTALLATION* Installation Turn the door lock by 180°. 3. Remove the lock catch from the door Press the door lock into the openings First take the rubber seal off the door on the opposite side of the door and place this to one side.
- Page 65 *INSTALLATION* Installation 4. Dismantle the door hinge from the door The door hinge cover must be unclipped from position and then removed. Remove the lock catch from the cover. This lock catch cover is no longer needed. Use a screwdriver to press down gently on position ...
- Page 66 *INSTALLATION* Installation 5. Change the door hinge on the door Useful tip: In some circumstances, the rods can be difficult to dislodge. The door hinge is secured to the door Moving the screwdriver with a levering with 2 angled rods. These rods need action while pulling at the same time to be removed with a screwdriver or may help to work the rods free.
- Page 67 *INSTALLATION* Installation 6. Change the lock catch on the door You now need the new door hinge cover supplied with the dryer. You now need the new lock catch cover supplied with the dryer which you have already fitted with the lock catch.
-
Page 68: Refitting
*INSTALLATION* Installation Refitting Now that you have changed the door hinging, the door will open from 7. Refit the door the opposite side. Press the rubber seal back into the groove on the door. Push the orange marker round to the other side so that you will see at ... -
Page 69: Technical Data
Technical data Height 33 7/16" (850 mm) Width 23 7/16" (596 mm) Depth 25 3/4" (655 mm) Depth with door open 42 3/8" (1077 mm) Slot-in Stackable Weight Approx. 137 lbs (62 kg) Drum volume 31.7 gal (120 L) Load quantity 17.6 lb (8 kg) dry laundry Capacity of condensed water container 1.27 gal (4.8 L) Hose length 63"... -
Page 70: Programmable Functions
Programmable functions Choosing and selecting Programming programmable functions You can use the programmable The number of the programmable functions to alter the dryer's function will appear on the display as electronics to suit your requirements. and a number: Programming is carried out in these e.g., . - Page 71 Programmable functions Editing and saving the programmable The number of the programmable function function, e.g., , will then light up again. You can either switch a programmable function on or off or select different Exiting the programming level options. Turn the program selector to the position.
-
Page 72: Drying Levels "Normal
Programmable functions Drying levels “Normal” Buzzer volume You can adjust the drying levels for the The buzzer volume can be changed. Normal program to one of seven You will hear it as it changes. different levels. = Quieter Options ... -
Page 73: Code
Programmable functions Code Conductivity The code prevents your dryer being This programmable function should used without your knowledge. only be altered if the water is so soft that it is likely to cause the electronics When the code has been activated, you which sense residual moisture in the have to enter the code after switching laundry to give false readings. -
Page 74: Display Switch-Off Status
Programmable functions Display switch-off status Appliance switch-off To save energy, the time display and The dryer switches off automatically sensor buttons will go out after after 15 minutes to save energy. This 10 minutes, and only the Start/Stop time can be extended or reduced. sensor button will flash. -
Page 75: Memory
Programmable functions Memory Buzzer on You can set the following: The The buzzer sounds to let you know the electronic module will save the drying program has finished. It can be level and any options selected for the switched on or off. -
Page 76: Airway Indicator
Programmable functions Airway indicator Display brightness dimmed Lint should be removed after drying. The brightness of the dimmed sensor The indicator light will also come buttons on the display can be set to on when a certain amount of lint has one of seven different levels. - Page 79 Please have the model and serial number of your appliance available when contacting Customer Service. Canada Importer Miele Limited Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.ca Customer Care Centre Phone: 800 565-6435 customercare@miele.ca Germany Manufacturer Miele &...
- Page 80 TWB 120 WP en-CA M.-Nr. 10 994 801 / 02...