Table of Contents
Advertisement
Automatic spray gun A-11
5 Installation
Personnel:
n
Qualified personnel
Protective equipment:
n
Protective gloves
5.1
General installation information
Adhere to the following general information for the installation:
n
Only carry out the installation and commissioning according to the steps described in this
operating manual.
n
Make sure that the utilised hose lines meet the requirements for pressure, chemical and
mechanical loads.
n
Only operate the automatic spray gun after proper fastening on a suitable carrier design.
n
Make sure that the connected compressed air is oil-free and free of solid matter.
n
Operate the automatic spray gun with processed, dried compressed air (air quality pursuant to
DIN ISO 8573-1: grade 4).
n
Vibration and recoil forces may occur on the automatic spray gun during operation. Ensure
sufficient fastening.
n
Never point the compressed air at living beings.
5.2
Dimensions
Fig. 2: Dimensions
■ 200-0149
ENGLISH
GB–15
Advertisement
Table of Contents
