Table of Contents
Advertisement
Inserting the needle packing
Fig. 18: Inserting the needle packing
1.
Insert entire needle packing ( Fig. 18/2) into the transition part ( Fig. 18/3).
2.
Screw in the seal screw ( Fig. 18/1).
3.
Place the seals ( Fig. 18/5) onto the centring tubes ( Fig. 18/4).
Fig. 19: Inserting the needle packing
4.
Insert the transition part ( Fig. 19/3) into the main element ( Fig. 19/2).
5.
Screw the transition part ( Fig. 19/3) and main element ( Fig. 19/2) together with the screw (
Fig. 19/1).
6.
Attach the fluid needle (
GB–30
Operating instructions
Ä Chapter 7.4 'Changing the fluid needle' on page 27)
T-Dok-041-GB-Rev.3
mail@krautzberger.com, www.krautzberger.com
Advertisement
Table of Contents
