Rear View Of The System - Dell EMC PowerEdge R7515 Installation And Service Manual

Table 5. Right control panel
Item Indicator or button
5 VGA port
NOTE: For the system to power on successfully, ensure the right control panel is connected well to the system.
NOTE: For more information about the ports, see the Dell EMC PowerEdge R7515 Technical Specifications.

Rear view of the system

Figure 7. Rear view of the system with two rear drives
Table 6. Rear view of the system with two rear drives
Item Ports, panels, or slots
1 Serial port
2 Drive
3 PCIe expansion card riser
1A (slot 2)
4 PCIe expansion card riser
2 (slot 3)
5
Power supply unit (PSU)
6
Power supply unit (PSU)
7
LOM Riser Ethernet port
(2) (Optional) (slot 1)
8 Ethernet ports (2)
9 USB 3.0 port (2)
10 iDRAC dedicated port
Icon Description
Enables you to connect a display device to the system. For more information,
see the Dell EMC PowerEdge R7515 Technical Specifications.
Icon Description
Enables you to connect a serial device to the system.
N/A Enables you to install drives that are supported on your system.
N/A
The expansion card riser enables you to connect PCI Express
expansion cards.
N/A
The expansion card riser enables you to connect PCI Express
expansion cards.
N/A For information about the PSU configurations, see the Dell EMC
PowerEdge R7515 Technical Specifications.
N/A For information about the PSU configurations, see the Dell EMC
PowerEdge R7515 Technical Specifications.
The NIC ports that are integrated on the LAN on Motherboard
(LOM) riser provide network connectivity. For more information
about the supported configurations, see theDell EMC PowerEdge
R7515 Technical Specifications.
The Ethernet ports that are integrated on the system board
provide network connectivity. These NIC ports can also be shared
with iDRAC when iDRAC network settings is set to shared mode.
These USB ports support USB 3.0.
Enables you to remotely access iDRAC. For more information, see
the iDRAC User's Guide at www.dell.com/poweredgemanuals.
System overview 13