Dell EMC PowerEdge R7515 Installation And Service Manual page 10

Table 2. Features available on the front of the system (continued)
Item Ports, panels, and
slots
2 Drive (12)
3 Right control panel
4 Information tag
Figure 3. Front view of the 24 x 2.5-inch drive system
Table 3. Features available on the front of the system
Item Ports, panels, and
slots
1 Left control panel
10 System overview
Icon
N/A
N/A
Icon
N/A
Description
● Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For
more information, see the Status LED indicators section.
● Quick Sync 2 (wireless): Indicates a Quick Sync enabled
system. The Quick Sync feature is optional. This feature
allows management of the system by using mobile devices
called as OpenManage Mobile (OMM) feature. Using iDRAC
Quick Sync 2 with OpenManage Mobile (OMM) aggregates
hardware or firmware inventory and various system level
diagnostic and error information that can be used in
troubleshooting the system. For more information, see
the iDRAC User's Guide available at
idracmanuals
Enables you to install drives that are supported on your
system. For more information about drives, see the Dell EMC
PowerEdge R7515 Technical Specifications.
Contains the power button, USB port, iDRAC Direct micro port,
and the iDRAC Direct status LED.
The Information tag is a slide-out label panel that contains
system information such as Service Tag, NIC, MAC address,
and so on. If you have opted for the secure default access
to iDRAC, the Information tag also contains the iDRAC secure
default password.
Description
Contains the system health, system ID, status LED, and the
iDRAC Quick Sync 2 (wireless) indicator.
NOTE: The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
● Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For
more information, see the Status LED indicators section.
https://www.dell.com/