ICP DAS USA I-7565 User Manual page 48

The uart to can bus converter

Hide thumbs Also See for I-7565:

Table of Contents

4.11 RA[CHK]<CR>

 Description: Reboot the CAN Converter module. If the module is

 Syntax: RA[CHK]<CR>

 Response: Valid command will reboot the CAN Converter module.



Note:

It is necessary to enable the "Error Response" function in the CAN

Converter Utility, in order to receive Syntax and/or communication

error information at the host PC.

 Example:

Command: RA<CR>

The CAN Converter module will reboot after it had received this

command.

I-7530, I-7530-FT, I-7530A, I-7565 User's Manual (Version 1.3, Apr/2015) -------- 48

displaying on but the CAN bus is off, users can use

this command to reboot the module in order to allow it

to work in order again.

Command character

Invalid command: ?<Error Code><CR>

Table of Contents

I-7530t I-7530-ft I-7530a I-7530 Tm-7530 I-7565-g ... Show all