ICP DAS USA I-7565 User Manual page 14

The uart to can bus converter

Hide thumbs Also See for I-7565:

Table of Contents

The pin assignments of the CAN port (DB9 male) on the I-7530 series

including I-7530, I-7530T, I-7530-FT, I-7530A, and I-7565 follows both the

CANopen DS102 profile and the appendix C of the DeviceNet

specifications. The wire connections are as follows.

Figure: The CAN Bus wire connection to the I-7530 series

The tM-7530 uses spring type connector on the CAN interface. The

wire connection to the tM-7530 is below.

Figure: The CAN Bus wire connection to the tM-7530

I-7530, I-7530-FT, I-7530A, I-7565 User's Manual (Version 1.3, Apr/2015) -------- 14

Table of Contents

I-7530t I-7530-ft I-7530a I-7530 Tm-7530 I-7565-g ... Show all