ICP DAS USA I-7565 User Manual page 44

4.9 P2BBDSPAE[CHK]<CR>
 Description: Change and apply the RS-232/RS-485/RS-422/USB
 Syntax: P2BBDSPCE[CHK]<CR>
P2
BB
D
S
P
C
E
Table: RS-232/RS-485/RS-422/USB baud rate list
BB
00 110 bps baud rate of RS-232
01 150 bps baud rate of RS-232
02 300 bps baud rate of RS-232
03 600 bps baud rate of RS-232
04 1200 bps baud rate of RS-232
05 2400 bps baud rate of RS-232
06 4800 bps baud rate of RS-232
07 9600 bps baud rate of RS-232
08 19200 bps baud rate of RS-232
09 38400 bps baud rate of RS-232
0A 57600 bps baud rate of RS-232
0B 115200 bps baud rate of RS-232
0C 230400 bps baud rate of RS-232, only for I-7565
I-7530, I-7530-FT, I-7530A, I-7565 User's Manual (Version 1.3, Apr/2015) -------- 44
parameters. These parameters will not be saved. When
the module is rebooted, the RS-232/RS-485/RS-
422/USB parameters will be recovered to the previous
setting.
Command character
RS-232/RS-485/RS-422/USB Baud rate
Data bit
0 = 5 bits Data formation
1 = 6 bits Data formation
2 = 7 bits Data formation
3 = 8 bits Data formation
Stop bit (0=1 stop bit, 1=2 stop bits)
Parity (0=None, 1=Odd, 2=Even)
Checksum (0=No, 1=Yes)
Error Response (0=No, 1=Yes);
Description