TELECO AUTOMATION TVRDS868B01 Installer Instruction Manual page 15

Table of Contents

Advertisement

Available languages

Available languages

6.1 Auto close time setting
This procedure configures the time lapse between complete opening and the automatic closure (if enabled).
The default time is 30 seconds. It is possible to set the time from 5 seconds to 180 seconds.
ON
memorized
P3 button is
located inside the
transmitter
(*)The procedure can be executed only within 30 seconds from power on.
Press P3 button of a memorized transmitter and keep it pressed for 5 seconds. The buzzer will emit one beep.
Release and press it again eight times within 5 seconds and keep it pressed for 2 seconds. The buzzer will make two
beeps at the end. In case of time-out, the control unit will sound four beeps and exit the procedure automatically.
Press once P3 to start the counting of time. The buzzer will make one beep.
Press again P3 to stop the counting after the desired lapse. The value will be memorized by the control unit.
6.2 Courtesy light time setting
This procedure configures the time of activation of the courtesy light (internal and external, if present).
The default time is 90 seconds. It is possible to set the time from 60 seconds to 12 hours.
ON
memorized
P3 button is
located inside the
transmitter
(*)The procedure can be executed only within 30 seconds from power on.
Press P3 button of a memorized transmitter and keep it pressed for 5 seconds. The buzzer will emit one beep.
Release and press it again five times within 5 seconds and keep it pressed for 2 seconds. The buzzer will make three
beeps at the end. In case of time-out, the control unit will sound four beeps and exit the procedure automatically.
Press once P3 to start the counting of time. The buzzer will make one beep.
Press again P3 to stop the counting after the desired lapse. The value will be memorized by the control unit.
P3
memorized
keep it (*)
pressed
within 5 sec.
(
5 s)
P3
memorized
keep it (*)
pressed
within 5 sec.
(
5 s)
8x
P3
keep it
pressed
(
2 s)
5x
P3
keep it
pressed
(
2 s)
15
P3
memorized
memorized
START
P3
memorized
memorized
START
P3
STOP
P3
STOP

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TVRDS868B01 and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF