Table of Contents
Advertisement
Breeze Mode
1.
Breeze Mode mimics the natural ebb and flow of winds in
nature by varying the fan speed.
NOTE: Breeze Mode always rotates your fan in the Summer
(CCW) direction
2.
To start Breeze Mode, press
LED will blink green and the fan will beep.
3.
To exit Breeze Mode and return to standard fan mode,
press
and
for 4 seconds. The led will blink green and
the fan will beep. Your fan will return to the direction and
speed it was set to prior to entering Breeze Mode.
F R- W2 0 0 1
and
for 4 seconds. The
Controlling the Fan
Controlling Multiple Fans with Remote or Wall Controls
Your remote and wall controls are capable of controlling
multiple fans. A remote or wall control has the ability to control
an unlimited number of fans with the only limitation being the
Bluetooth® range of the control and fan.
Pairing a remote control or wall control to an additional fan(s)
can be performed in the same manner as described in the
pairing section.
NOTE: Pairing must be completed within three (3) minutes of
powering the fan.
Synchronizing Control Across Multiple Fans
If you are controlling more than one fan with a remote control,
there is a possibility that their light state, fan state or fan
direction can get out of sync. To bring the fans/lights back
into sync please follow the instructions on the next page.
11
21
Advertisement
Table of Contents
Need help?
Do you have a question about the Renegade and is the answer not in the manual?
Questions and answers