Network Installation - Omron CS1W-ETN11 Operation Manual

10base-5, 10base-t ethernet units
Hide thumbs Also See for CS1W-ETN11:
Table of Contents

Advertisement

Basic Installation Precautions
• Take the greatest care when installing the Ethernet System, being sure to follow ISO 8802-3 specifications.
You must obtain a copy of these specifications and be sure you understand them before attempting to
install an Ethernet System. Unless you are already experienced in installing communications systems, we
strongly recommend that you employ a professional to install your system.
• Do not install Ethernet equipment near sources of noise. If noise-prone environments are unavoidable, be
sure to take adequate measures against noise interference, such as installing network components in
grounded metal cases, using optical links in the system, etc. Further information on measures that can be
taken against noise is given later in this section.
Recommended Products
The following products are recommended for use with the CS1W-ETN01 Ethernet Unit.
CS1W-ETN01 (10Base-5)
CS1W-ETN11, CJ1W-ETN11 (10Base-T)
CS1W-ETN01 (10Base-5) Precautions
Coaxial Cable Installation Precautions
Basic Precautions
• As a rule, always lay coaxial cables indoors. Laying coaxial cables outdoors requires special measures that
should be performed only by a professional. If coaxial cable must be used outdoors, request the work from
a professional.
• Attach a terminator to each end of the coaxial cable.
• Cover all exposed metal portions of the coaxial cable except ground points with protective covers or PVC
tape to prevent contact with grounds or other metal objects.
Appendix A

Network Installation

Part
Transceiver
Transceiver cable
24-VDC Power Supply
Part
Maker
Hub
Allied
RH509E
Telesis
MR820TLX
Twisted-pair
---
---
cable
Company
Hirakawa Hewtech Corp.
Mitsubishi Cable Indus-
tries,Ltd.
Mitsubishi Cable Indus-
tries,Ltd.
OMRON
Model
Specifications
number
9-port hub
9-port hub with 10Base-5
backbone port
Category 3, 4, or 5 UTP
(unshielded twisted-pair)
cable
Model
MTX-210TZ
ET-10081
Transceiver cables
(molded type)
S82J Series
Inquires
Allied Telesis
(0120) 86-0442
(in Japan only)
---
251

Advertisement

Table of Contents
loading

Table of Contents